Kai Ren

Dr. Kai Ren

Wentworth Institute of Technology, The Ohio State University, Columbus, OH, USA

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
13 October 2016 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Kai RenKai Ren
Kai Ren
RBRobert J. Burkholder
Robert J. Burkholder
A 2-D near-field uniform diffraction tomographic (UDT) imaging algorithm is formulated to generate images of targets embedded in a layered structure. The conventional diffraction tomography (DT) improperly applies the stationary phase method for stratified environments to reduce the innermost spectral integral. In DT, the large argument is assumed to be the depth, which is not appropriate for near-field imaging. This results in amplitude discontinuities occurring at the interfaces between adjacent layers. The correct large argument is the free space wavenumber as used in high-frequency asymptotic solutions. The UDT therefore yields uniformly continuous images across the interfaces. And like the DT, the UDT retains the fast Fourier transform relation in the algorithm for generating images very efficiently. Numerical and experimental image comparisons between DT and UDT for objects buried in stratified environments are presented to demonstrate the efficacy of the proposed UDT method.

4 September 2019 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Kai RenKai Ren
Kai Ren
QWQi Wang
Qi Wang
RBRobert J. Burkholder
Robert J. Burkholder
A novel fast back-projection (FBP) approach is presented as a more robust alternative to conventional diffraction tomography (DT) for near-field 3-D microwave imaging. Like DT, the FBP algorithm utilizes the spectral Green's function and stationary phase solution in the forward model, enabling the implementation of the fast Fourier transform to achieve real-time image generation with the same efficiency as DT. However, if the Green's function or the antenna gain pattern has any nulls within the imaging volume, DT can have singularities that give rise to unbalanced images. FBP not only naturally avoids the singularity problem and obtains balanced images through the point spread function, but is also much less sensitive to noise due to the matched-filter property of back-projection. 3-D simulations and measurement of a monostatic near-field free space imaging scenario are presented to demonstrate the efficiency of the proposed FBP method in comparison with DT, and the improved uniformity and noise resistance of the image.

16 July 2019 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
SSSajjad Sadeghi
Sajjad Sadeghi
KMKarim Mohammadpour-Aghdam
Karim Mohammadpour-Aghdam
Kai RenKai Ren
Kai Ren
Reza Faraji-DanaReza Faraji-Dana
Reza Faraji-Dana
RBRobert J. Burkholder
Robert J. Burkholder
Estimation of wall parameters is critical for focused through-the-wall imaging (TWI). In this paper, a novel algorithm based on pole extraction and wall reflection coefficients is presented to accurately estimate the essential parameters of a multi-layered wall. The generalized pencil of function (GPOF) is applied to decompose the frequency-domain received signal into a summation of ordered exponential terms and phase delays. Matching the terms with the multiple wall reflections provides equations for extracting the parameters. A frequency-domain calibration process is proposed to remove the antenna response from the measured wall response. The formulation of the proposed parameter extraction and calibration algorithms is presented along with the simulated and measured results for validation. The efficacy of the method is demonstrated on a real TWI system.

27 February 2020 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Kai RenKai Ren
Kai Ren
MNMohammad Ranjbar Nikkhah
Mohammad Ranjbar Nikkhah
NBNader Behdad
Nader Behdad
We present a systematic method for designing dual-polarized, platform-mounted, high-frequency (HF) antennas for near-vertical incidence skywave (NVIS) applications. To overcome the bandwidth and efficiency limitations of electrically-small antennas, the characteristic mode (CM) theory is used to exploit the metallic platform as the main radiator. Low-profile coupling elements are mounted on different locations of the platform to excite two orthogonal, horizontally-polarized CMs. This way, dual-polarized operation is achieved with a high isolation and sufficiently-wide bandwidth. In the design process, several key practical issues are taken into account and their impacts on the performance of the antenna are examined carefully. These include the type and design of the coupling elements, the presence and type of the earth, and the non-idealities and power handling capability in the impedance matching network components. The simulation results of both a full-scale and a 1:50 scaled model of the proposed structure are presented. The scaled-model prototype was fabricated and characterized in the presence of a ground plane emulating the properties of real earth at the scaled frequency of operation. The measurement results show a good agreement with the simulations, demonstrating the efficacy of the proposed approach in designing dual-polarized, platform-based HF antennas.

6 July 2021 in IEEE Open Journal of Antennas and Propagation
Verified
Journal Article
Open access
Kai RenKai Ren
Kai Ren
RMRuyu Ma
Ruyu Ma
NBNader Behdad
Nader Behdad
We present a method to enhance the accuracy of platform-based, high-frequency (HF) direction-finding (DF) systems using dynamic mode selection. To improve bandwidth and efficiency, the metallic platform supporting the DF array is used as the primary radiator by employing electrically small antennas to excite linearly independent combinations of its characteristic modes (CMs). However, the radiation characteristics of these modes vary dramatically over the HF band, making it difficult to achieve consistently good DF accuracy with a fixed system. To alleviate this, we propose a dynamic mode selection strategy to achieve enhanced DF accuracy. This strategy is based on the assumption that the number of available CMs of the platform is greater than the number of available coherent receive channels. Thus, dynamic mode selection allows for choosing the optimal antenna combination to obtain the best DF accuracy at each frequency. This strategy is demonstrated for an airborne DF system employing five electrically small antennas and up to four coherent receive channels. We demonstrate the efficacy of the proposed approach using computer simulations and scaled-model experiments. Simulation and measurement results show that dynamic mode selection can significantly enhance the DF accuracy of platform-based HF DF systems using a limited number of coherent receive channels.

26 March 2018 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Kai RenKai Ren
Kai Ren
JCJie Chen
Jie Chen
RBRobert J. Burkholder
Robert J. Burkholder
The uniform diffraction tomographic (UDT) algorithm corrects discontinuities associated with conventional diffraction tomographic (DT) algorithms when applied to imaging of objects buried in layered media. The cause of the discontinuities in DT is in the implementation of the stationary phase solution for evaluating the spectral integral. The usual approach is to make a far-field approximation assuming that the depth is large. However, this is not appropriate for near-field imaging. UDT overcomes this issue by choosing the correct large asymptotic parameter in the exponent of the spectral integrand. In this paper the original 2-D scalar UDT algorithm is extended to a fully vector 3-D solution involving the dyadic Green’s function for the layered media, the polarization of the gain pattern of the probe antenna, and the stationary phase evaluation of a 2-D spectral integral. The 3-D UDT is demonstrated to provide smoothly continuous images, and like the conventional DT, the fast Fourier transform (FFT) is implemented to generate images in real time. 3-D numerical simulations and experimental results are presented to verify the accuracy and efficacy of the 3-D UDT algorithm.