Three translational (3T) degree-of-freedom (DOF) parallel mechanism is widely used in the industrial field because of its compact structure and excellent dynamic performance. Combined with the 3T parallel mechanism studied at this stage, a novel 3T parallel mechanism is proposed. Firstly, the DOF of the mechanism is analyzed by using the screw theory. Secondly, the position, velocity, and singularity of the mechanism are analyzed, and the workspace of the mechanism is analyzed through the positive position solution. Then, the trajectory planning in joint space and coordinate space is completed, and a common mathematical model of grasping trajectory is established. Thirdly, the kinematics simulation analysis of the mechanism is carried out. Finally, the prototype platform was built and the grasping experiment was carried out, which verified the rationality of the mechanism design and the correctness of the theoretical analysis.
A novel synchronous telescopic parallelogram mechanism with movement realized by a belt drive is proposed, from which a compound kinematic limb is derived. According to the configuration derivation, a class of two-translation (2T), three-translation (3T) and three-translation-one-rotation (3T1R) parallel mechanisms is obtained by assembling the above kinematic limbs. Since the motion of these limbs in the parallelogram mechanism are dependent, screw theory is applied to illustrate the mobility of the obtained lower mobility parallel mechanisms. Moreover, through the simplified kinematic equations for these mechanisms, their position, velocity and singularity are analyzed and their workspaces are calculated. Finally, the prototype of the 2T parallel mechanism is manufactured and experimented to validate mobility and motion feasibility.