21 December 2020 in Shock and Vibration
Low-frequency carbody swaying on China’s high-speed trains is not only an impediment to ride comfort but it may also be an operational risk under some extreme situations. To study the mechanism and mitigate the carbody swaying problem for high-speed trains, a multibody dynamics model was established based on both linear and nonlinear analyses. Whilst it is generally assumed that carbody swaying is predominantly caused by carbody hunting motion, the results in this paper has shown that, under certain boundary conditions, bogie-hunting motion can also lead to low-frequency carbody swaying. This low-frequency swaying phenomenon was also found to be caused by the excessively low wheel-rail contact or mismatched suspension parameters. Parametric optimization analysis was accordingly conducted from the perspective of the wheel-rail contact relationship and the suspension system. The analysis indicated that although optimizing the suspension parameters can meet the requirement of vehicle stability, bogie's vibration worsen when the wheel profiles wear over time. Overall, while rail reprofiling was found to be one of the fundamental solutions to mitigate carbody swaying, it is cost prohibitive for most routine operational applications. Thus, for economic considerations and the fact that low wheel-rail contact conicity is also a contributing factor to carbody swaying, vehicles with worn wheels can also be operated on the rail line, which was successfully verified by the field data presented in this paper.
4 May 2022 in Journal of Vibration and Control
Passive suspensions cannot sufficiently reduce vehicle vibrations on tracks with poor irregularities or when the vehicle was operated at higher speeds. This study proposes three semi-active control algorithms for a secondary lateral damper to enable the vehicle to be operated on high-speed dedicated railways at 350 km/h and conventional low-speed railways at 160 km/h. A high-speed rail vehicle dynamics model with controllable dampers is built to study the feasibility of those algorithms through numerical investigations. Then, both field tests on track and lab tests on a full-scale roller rig were performed to examine the functionality of the controller hardware system and the valve-driven semi-active damper. Furtherly, a time-delay compensation based on the signal amplitude is developed and verified. Results from the on-track and roller rig tests state that the proposed semi-active control algorithms and the designed control system can effectively improve the ride quality of the vehicle when it is put into operation in different track conditions and at various speeds.
12 April 2022 in Journal of Low Frequency Noise, Vibration and Active Control
With the rapid development of railways in China, effective coordination of the operation of high-speed trains on existing tracks can bring significant economic benefits to railway transportation. However, high-speed trains running on existing tracks will have to cope with larger track irregularities and navigate smaller curve radii, potentially increasing their vibrations. In order to improve the quality of operation of high-speed trains on existing railways, a self-adjusting hybrid damping control (SAHDC) strategy utilizing a fuzzy controller is adopted in this study. A secondary lateral magnetorheological damper (MRD) is controlled to balance the vibration between the car body, bogie, and wheelset. The MRD behavior is described using a viscoelastic-plastic (VEP) model and nonlinear autoregressive exogenous (NARX) inverse model. A dynamical vehicle model with 50 DOFs is constructed and simulated under different existing track conditions. The results show that the SAHDC can guarantee the required ride quality of the car body, while reducing the vibration of the bogie frame and wheelsets as much as possible during travel on straight and curved tracks and suppressing derailment on turnouts.