In this work, it is reported a scalable and systematic protocol for the preparation of xerogels based on the use of green, highly available, and low‐cost materials, i.e. halloysite nanoclay and chitosan, without the need for any expensive equipment or operational/energetic demands. Starting from colloidal dispersions, rheological studies demonstrate the formation of hydrogels with zero‐shear viscosities enhanced by ≈9 orders of magnitude and higher storage moduli. Hence, the corresponding self‐standing xerogels are prepared by a simple solvent casting method and their properties depend on the concentration of halloysite, possessing enhanced thermal stability and outstanding mechanical performances (elastic modulus and ultimate elongation of 165 MPa and 43%, respectively). The resulting biohybrid materials can be exploited for environmental remediation. High removal efficiencies are reached for the capture of organic molecules from aqueous media and the CO 2 capture from the atmosphere is also investigated. Most importantly, the presence of an inorganic skeleton within the xerogels prevents the structure from collapsing upon drying and it allows for the control over their morphology and shape. Therefore, taking advantage of the overall features, the designed xerogels offer an attractive strategy for sustainably tackling pollution and for environmental remediation in a plethora of different domains.
Self‐assembling of very long natural clay nanotubes represents a powerful strategy to fabricate thermo‐stable inorganic thin films suitable for environmental applications. In this work, self‐standing films with variable thicknesses (from 60 to 300 µm) are prepared by the entanglement of 20–30 µm length Patch halloysite clay nanotubes (PT_Hal), which interconnect into fibrosus structures. The thickness of the films is crucial to confer specific properties like transparency, mechanical resistance, and water uptake. Despite its completely inorganic composition, the thickest nanoclay film possesses elasticity comparable with polymeric materials as evidenced by its Young's modulus (ca. 1710 MPa). All PT_Hal‐based films are fire resistant and stable under high temperature conditions preventing flame propagation. After their direct flame exposure, produced films do not show neither deterioration effects nor macroscopic alterations. PT_Hal films are employed as precursors for the development of functional materials by alkaline activation and thermal treatment, which generate highly porous geopolymers or ceramics with a compact morphology. Due to its high porosity, geopolymer can be promising for CO 2 capture. As compared to the corresponding inorganic film, the CO 2 adsorption efficiency is doubled for the halloysite geopolymeric materials highlighting their potential use as a sorbent.
A scalable protocol is proposed for the fabrication of hollow spherical capsules by geopolymerization of halloysite clay nanotubes (HNTs) incorporated within alginate gel beads. Alginate/HNTs composite beads have been geopolymerized by alkaline treatment through their immersion in highly concentrated NaOH solution. The influence of the immersion time on the structure and mesoscopic properties of the beads has been studied to optimize the geopolymerization efficacy as well as the mechanical resistance and adsorption performances of the capsules. SEM images demonstrate that the alkaline treatment is efficient in the conversion of compact beads to hollow spherical capsules, which possess improved water uptake capacity and enhance flexibility under compressive forces as evidenced by the relevant increase (in the range ca. 55–75%) of the elastic modulus. Due to their internal cavity and surface porosities, geopolymerized capsules exhibit better adsorption performances toward hydrocarbons with respect to the untreated alginate/HNTs beads. Moreover, geopolymerization of alginate/HNTs beads significantly improves the CO 2 capture efficiency. The CO 2 amount adsorbed by the composites bead has been doubled after 5 seconds of alkaline treatment. This study highlights that the geopolymerization of halloysite loaded in biopolymeric beads can be exploited to obtain sustainable materials suitable for CO 2 storage and removal of contaminants.