26 September 2022 in Quality Engineering
In the past few decades, various sampling strategies have been developed for different perspectives or occasions to benefit from cost reduction or time-saving when one performs lot disposition, particularly for those inspected items or expensive procedures. The quick switching sampling (QSS) system has been important in examining fewer samples under the same quality requirements and was designed with a dually flexible mechanism for varied qualities. However, most related studies considered only a fixed switching policy either critical value or sample-sized tightenings, which might neglect the collective effect of two types of QSS systems. In this study, we integrate two variables QSS (VQSS) systems in a generalized form, known as integrated VQSS (IVQSS), based on the Cpmk index, a non-scale process performance indicator considering centering, variation, and quality loss simultaneously to accommodate advantages of two individual systems. The operating characteristic function is derived using the Markov Chain theory. Furthermore, we developed a mathematical model to minimize the average sample number and limit two acceptable sampling risks under desirable submitted quality levels. The plan parameters are obtained for making a reliable judgment on submissions by solving this optimization problem. Finally, to illustrate the practicability of the proposed method, we demonstrated a numerical application obtained from a solar panel industry and provided the solved plan parameters under commonly used conditions for convenient use.
1 June 2022 in International Journal of Production Research
Multiple sampling plan (MSP) has been proved that the sample units required for inspection at each stage are usually smaller than the conventional single or double sampling. However, it is more complex to administer and difficult to derive the corresponding operating characteristic function since the judgment on the submitted lot under the MSP is not only dependent on the result of current sampling but also on previous sampling results. Thus, this paper attempts to provide a relaxed type of conventional MSP by assuming the sampling inspection at each stage is independent which is called variables stage-independent multiple sampling plan and integrated with the most widely-used process capability index Cpk. For the cost-efficient purpose, the plan parameters are solved under an optimisation model that minimises the average sample number by satisfying the required quality levels and tolerated risks. Finally, the applicability of the proposed plan is illustrated in a case study.
1 August 2021 in Applied Mathematical Modelling
28 December 2020 in Journal of the Operational Research Society
Acceptance sampling has been widely used in practical applications for incoming or receiving inspections, and various sampling plans have been developed for different circumstances and purposes. Skip-lot sampling plans (SkSPs) are an effective sampling procedure and may be useful as a reduced inspection system when a submitted lot’s quality is good and stable. Thus, this study attempts to integrate the concept of the SkSP and the process yield index Spk to develop a variables SkSP of type 2 (SkSP-2) with an Spk -based single sampling plan (SSP) as the reference plan. This plan is suitable for today’s high-yield process environments and products, with a normally distributed quality characteristic under bilateral specification limits. The plan parameters are solved by an optimisation model with nonlinear constraints, which minimises the average sample number (ASN) and satisfies the quality and risk requirements specified by the producer and consumer. The performance and efficiency of the proposed SkSP-2 are examined and compared with the variables SSP in terms of the operating characteristic and ASN curves. Additionally, tables of the plan parameters under selected conditions are provided for reference, and an example from the printed circuit board industry is presented to demonstrate the practicality of the proposed plan.
11 January 2022 in Quality and Reliability Engineering International
19 April 2023 in Annals of Operations Research