27 June 2017 in Journal of Materials Science
1 January 1997 in Journal of Applied Physics
Binary SmxFe100−x(2<x<12) thin films were made by rf sputtering of the target onto preheated quartz glass substrates. Structural characterization, magnetic measurement, and microstructure observation were carried out by x-ray diffractometer, vibrating sample magnetometer, scanning electron microscope, and transmission electron microscope (TEM), respectively. Directly crystallized films were synthesized at substrate temperature higher than 400 °C and the main phase of the films is the ThMn12-type tetragonal phase with lattice parameters a=8.65 Å and c=4.78 Å. Films have the predominant [111] and [001] crystallographic texture when the substrate temperature is lower and higher than 600 °C, respectively. The perpendicular magnetization measured under the applied field of 22 kOe is about 30% higher than the saturation magnetization of bulk SmFe11Ti. Coercivities of about 4.0 kOe can be obtained in the substrate temperature range between 430 and 550 °C with grain size of 0.2–0.3 μm. Cross-sectional TEM microstructure observations show significant columnar structures in the films. The [001] texture formed in the films is also clearly reflected by the planar and cross-sectional TEM diffraction patterns.
21 January 2020 in Journal of Materials Science
1 June 2026 in SSRN Electronic Journal
The martensite start (Ms) and burst (Mb) temperatures in steels are known to change with changes in austenite grain size. Ms and Mb gradually decrease as the grain size decreases until it reaches to around 20 µm. After this point, they abruptly fall by around 30 to 40 K. A proposed mechanism explains how austenite grain size influences Ms and Mb as well as why the burst can occur in lenticular martensite. This mechanism is based on the elastic energy stored in neighboring austenite grains. The elastic energy resulting from martensite shape strain is independent of martensite variants because they are equivalent in the parent austenite. However, the stored energy in neighboring austenite depends on variants and orientations due to the anisotropy in austenite elasticity. Elastic anisotropy plays an important role in the stored energy in neighboring austenite grains and significantly influences Ms and Mb. This mechanism explains the dependence of Ms and Mb on austenite grain size and relates directly to the burst mechanism. Additionally, it predicts that austenite crystallographic textures significantly influence Ms and Mb and explains the curved tail in transformation curves, where transformation rates are initially low around Ms.