19 May 2017 in The Analyst
GÖGizem Kocakuşak Özdemir
We report the application of machine learning to smartphone-based colorimetric detection of pH values.
20 December 2016 in Analytical Methods
GÖGizem Kocakuşak Özdemir
An ultra-low cost, field-deployable, plastic fiber based smartphone spectrometer system was developed to study dye adsorption from aqueous systems.
5 October 2016 in Journal of Micromechanics and Microengineering
In this study, we investigate the effects of CO 2 laser polishing on microscopic structures fabricated by femtosecond laser assisted carving (FLAC). FLAC is the peripheral laser irradiation of 2.5D structures suitable for low repetition rate lasers and is first used to define the microwell structures in fused silica followed by chemical etching. Subsequently, the bottom surface of patterned microwells is irradiated with a pulsed CO 2 laser. The surfaces were characterized using an atomic force microscope (AFM) and scanning electron microscope (SEM) in terms of roughness and high quality optical imaging before and after the CO 2 laser treatment. The AFM measurements show that the surface roughness improves more than threefold after CO 2 laser polishing, which promises good channel quality for applications that require optical imaging. In order to demonstrate the ability of this method to produce low surface roughness systems, we have fabricated a microfluidic channel. The channel is filled with polystyrene bead-laden fluid and imaged with transmission mode microscopy. The high quality optical images prove CO 2 laser processing as a practical method to reduce the surface roughness of microfluidic channels fabricated by femtosecond laser irradiation. We further compared the traditional and laser-based glass micromachining approaches, which includes FLAC followed by the CO 2 polishing technique.
5 April 2016 in Optics Letters
Here we numerically demonstrate a straightforward method for optical detection of hydrogen gas by means of absorption reduction and colorimetric indication. A perfectly absorbing metal-insulator-metal (MIM) thin film interference structure is constructed using a silver metal back reflector, silicon dioxide insulator, and palladium as the upper metal layer and hydrogen catalyst. The thickness of silicon dioxide allows the maximizing of the electric field intensity at the interface at the quarter wavelengths and enabling perfect absorption with the help of highly absorptive palladium thin film . While the exposure of the MIM structure to moderately increases reflection, the relative intensity contrast due to formation of metal hydride is extensive. By modifying the insulator film thickness and hence the spectral absorption, the color is tuned and eye-visible results are obtained.
11 July 2018 in Applied Optics
We demonstrate the development and application of a low-cost smartphone turbidimeter system to be used on water samples collected from natural resources. The proposed system depends on the spectroscopic measurements of both forward- and side-scattered light. A custom-designed cradle was fabricated using 3D printing, and plastic optical fibers were used to couple light from the smartphone’s built-in flash and transmit the collected scattered light to the camera sensor. The performance parameters of the smartphone turbidimeter were investigated and compared to commercial systems, and the lowest limit of detection was found to be 5.58 NTU for forward-scattered detection. The results obtained in the proposed scattered-light-based spectroscopic turbidimeter and the practicality achieved by this extremely low-cost device will have a great impact on water science and technology.