Guodong Lu

Guodong Lu

Auto-generated profile, based on publicly available information

Guodong Lu

Zhejiang University, Hangzhou, China

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
17 September 2021 in Chemosensors
Verified
Journal Article
Open access
PDF file
Jin WangJin Wang
Jin Wang
CZCheng Zhang
Cheng Zhang
MCMeizhuo Chang
Meizhuo Chang
WHWei He
Wei He
XLXiaohui Lu
Xiaohui Lu
GLGuodong Lu
Guodong Lu
The electronic nose system is widely used in tea aroma detecting, and the sensor array plays a fundamental role for obtaining good results. Here, a sensor array optimization (SAO) method based on correlation coefficient and cluster analysis (CA) is proposed. First, correlation coefficient and distinguishing performance value (DPV) are calculated to eliminate redundant sensors. Then, the sensor independence is obtained through cluster analysis and the number of sensors is confirmed. Finally, the optimized sensor array is constructed. According to the results of the proposed method, sensor array for green tea (LG), fried green tea (LF) and baked green tea (LB) are constructed, and validation experiments are carried out. The classification accuracy using methods of linear discriminant analysis (LDA) based on the average value (LDA-ave) combined with nearest-neighbor classifier (NNC) can almost reach 94.44~100%. When the proposed method is used to discriminate between various grades of West Lake Longjing tea, LF can show comparable performance to that of the German PEN2 electronic nose. The electronic nose SAO method proposed in this paper can effectively eliminate redundant sensors and improve the quality of original tea aroma data. With fewer sensors, the optimized sensor array contributes to the miniaturization and cost reduction of the electronic nose system.

26 October 2018 in IEEE Transactions on Industrial Informatics
Verified
Journal Article
Closed access
Jin WangJin Wang
Jin Wang
WWWei Wang
Wei Wang
CWChao-Hua Wu
Chao-Hua Wu
SCSilu Chen
Silu Chen
JFJian-Hui Fu
Jian-Hui Fu
GLGuo-Dong Lu
Guo-Dong Lu
Base frame calibration is the foundation for the cooperative work of manipulators. The commonly applied method usually constructed a matrix equation. The contact-mode approach is limited by the insufficient accuracy and efficiency while the high cost impedes the application of methods with the noncontact mode. In this paper, a projection-based method is proposed. All the transformation parameters can be solved based on the geometric constraints. When cooperative manipulators form the closed-chain asynchronously, the topological structure is projected into a particular plane. With the utilization of trigonometric functions. The rotation angle and translation parameters can be determined with a simple calculation process. The greatest novel feature of this analysis is that only two calibration points are required. The experiment result shows that both the accuracy and efficiency can be much better in the asynchronous calibration

15 February 2021 in Sensors
Verified
Journal Article
Open access
PDF file
TZTao Zheng
Tao Zheng
ZDZhizhao Duan
Zhizhao Duan
Jin WangJin Wang
Jin Wang
GLGuodong Lu
Guodong Lu
SLShengjie Li
Shengjie Li
ZYZhiyong Yu
Zhiyong Yu
Semantic segmentation of room maps is an essential issue in mobile robots’ execution of tasks. In this work, a new approach to obtain the semantic labels of 2D lidar room maps by combining distance transform watershed-based pre-segmentation and a skillfully designed neural network lidar information sampling classification is proposed. In order to label the room maps with high efficiency, high precision and high speed, we have designed a low-power and high-performance method, which can be deployed on low computing power Raspberry Pi devices. In the training stage, a lidar is simulated to collect the lidar detection line maps of each point in the manually labelled map, and then we use these line maps and the corresponding labels to train the designed neural network. In the testing stage, the new map is first pre-segmented into simple cells with the distance transformation watershed method, then we classify the lidar detection line maps with the trained neural network. The optimized areas of sparse sampling points are proposed by using the result of distance transform generated in the pre-segmentation process to prevent the sampling points selected in the boundary regions from influencing the results of semantic labeling. A prototype mobile robot was developed to verify the proposed method, the feasibility, validity, robustness and high efficiency were verified by a series of tests. The proposed method achieved higher scores in its recall, precision. Specifically, the mean recall is 0.965, and mean precision is 0.943.

19 January 2023 in Advanced Intelligent Systems
Verified
Journal Article
Open access
JWJin Wang
Jin Wang
JYJingru Yang
Jingru Yang
GLGuodong Lu
Guodong Lu
CZCheng Zhang
Cheng Zhang
ZYZhiyong Yu
Zhiyong Yu
YYYing Yang
Ying Yang
In the fabric manufacturing industry, fabric defect detection is a practical yet challenging task, due to the problem of defects with small sizes or unremarkable appearances distributed in fabric images with high resolution. Some deep‐learning‐based solutions try to tackle the aforementioned problem but with limited achievements. Herein, a brand new module called adaptively fused attention module (AFAM) is proposed to improve the detection performance by enabling the network to concentrate more on the small or unremarkable defects in terms of 1) enhancing the feature maps both spatial‐wise and channel‐wise, 2) enhancing the attention information flow between the channel‐attention feature map and the spatial‐attention feature map, and 3) enriching background information. Experiments on the MS‐COCO dataset show that AFAM reaches higher AP than other state‐of‐the‐art (SOTA) attention modules (e.g., squeeze‐and‐excitation network [SE], efficient channel attention [ECA], convolutional block attention module [CBAM]). Meanwhile, on the Smart Diagnosis of Cloth Flaw Dataset (CloF), the Cascade R‐CNN (Resnext101) + AFAM outperforms the SOTA in the official leaderboard of the CloF dataset. Speed‐wisely, the solution achieves a 12.19‐FPS on RTX 3090, thus making it practical to be applied in the industry of fabric defect detection.

20 May 2020 in Sensors
Verified
Journal Article
Open access
PDF file
TZTao Zheng
Tao Zheng
ZYZhiyong Yu
Zhiyong Yu
Jin WangJin Wang
Jin Wang
GLGuodong Lu
Guodong Lu
The foot arch index is an important index to evaluate the health of human feet and the biomechanics line, aiming at addressing the shortcomings of the low efficiency and slow speed of manual foot arch index measurement; in this work, an automatic foot arch index measurement method based on a flexible membrane pressure sensor was proposed. The distribution of plantar pressure data was obtained from the flexible membrane pressure sensor and converted into a digital image. The 8-neighborhood correlation pixel method was proposed to remove the interference of isolated noise points. In order to remove the toes’ data without affecting the foot sole data, the row element association algorithm was proposed. The front and back endpoints of the foot were automatically located to obtain the foot length, and the foot arch index was also automatically obtained based on the foot arch pressure area. Whether it was a high arch foot, flat foot or normal foot, the method proposed in this paper could accurately and quickly distinguish them. The prototype was developed, and its feasibility and validity were verified by a series of tests.

16 February 2023 in IEEE Transactions on Visualization and Computer Graphics
Verified
Journal Article
Closed access
XLXinqi Liu
Xinqi Liu
Jituo LiJituo Li
Jituo Li
GLGuodong Lu
Guodong Lu
We propose a robust and highly realistic clothing modeling method to generate a 3D clothing model with visually consistent clothing style and wrinkles distribution from a single RGB image. Notably, this entire process only takes a few seconds. Our high-quality clothing results benefit from the idea of combining learning and optimization, making it highly robust. First, we use the neural networks to predict the normal map, a clothing mask, and a learning-based clothing model from input images. The predicted normal map can effectively capture high-frequency clothing deformation from image observations. Then, by introducing a normal-guided clothing fitting optimization, the normal maps are used to guide the clothing model to generate realistic wrinkles details. Finally, we utilize a clothing collar adjustment strategy to stylize clothing results using predicted clothing masks. An extended multi-view version of the clothing fitting is naturally developed, which can further improve the realism of the clothing without tedious effort. Extensive experiments have proven that our method achieves state-of-the-art clothing geometric accuracy and visual realism. More importantly, it is highly adaptable and robust to in-the-wild images. Further, our method can be easily extended to multi-view inputs to improve realism. In summary, our method can provide a low-cost and user-friendly solution to achieve realistic clothing modeling.