Saturated tabletop lasers operating at repetition rate with average powers were demonstrated at wavelengths between 16.5 and in the transitions of Ni-like ions. The results were obtained using picosecond laser heating pulses with an energy of only by optimizing the angle of incidence for maximum energy deposition. Lasing was also observed for shorter wavelength transitions of the same isoelectronic sequence, with amplification in the line of Ni-like Sn approaching gain saturation, and progressively reduced gain for wavelengths as low as for Ni-like Te. These high repetition rate soft x-ray lasers will enable new applications in science and the development of unique metrology and processing tools for industry.
We report saturated operation of an 18.9-nm laser at 5-Hz repetition rate. An amplification with a gain–length product GL of 15.5 is obtained in the laser line of Ni-like Mo in plasmas heated at grazing incidence with pulses of 8.1-ps duration from a tabletop laser system. Lasing is obtained over a broad range of time delays and pumping conditions. We also measure a GL of 13.5 in the 22.6-nm transition of the same ion. The results are of interest for numerous applications requiring high-repetition-rate lasers at wavelengths below 20 nm.
We present the first measurements of the angular dependence of the betatron x-ray spectrum produced by electrons inside the cavity of a laser-wakefield accelerator. Electrons accelerated up to 300 MeV energies produce a beam of broadband, forward-directed betatron x-ray radiation extending up to 80 keV. The angular resolved spectrum from an image plate-based spectrometer with differential filtering provides data in a single laser shot. The simultaneous spectral and spatial x-ray analysis allows for a three-dimensional reconstruction of electron trajectories with micrometer resolution, and we find that the angular dependence of the x-ray spectrum is showing strong evidence of anisotropic electron trajectories.
We report gain-saturated operation of a tabletop laser in Ni-like Cd at a repetition rate. A gain–length product was obtained by heating a precreated plasma with duration Ti:sapphire laser pulses with an energy of only impinging at a grazing angle of 23°. With an average power of , this laser is an attractive coherent source for at-wavelength metrology of extreme UV lithography optics and other applications.
The Advanced Radiographic Capability (ARC) laser system at the National Ignition Facility (NIF) is designed to ultimately provide eight beamlets with a pulse duration adjustable from 1 to 30 ps, and energies up to 1.5 kJ per beamlet. Currently, four beamlets have been commissioned. In the first set of 6 commissioning target experiments, the individual beamlets were fired onto gold foil targets with energy up to 1 kJ per beamlet at 20–30 ps pulse length. The x-ray energy distribution and pulse duration were measured, yielding energy conversion efficiencies of 4–9 × 10−4 for x-rays with energies greater than 70 keV. With greater than 3 J of such x-rays, ARC provides a high-precision x-ray backlighting capability for upcoming inertial confinement fusion and high-energy-density physics experiments on NIF.