22 June 2022 in Proceedings of the IEEE
Randomly-coupled multi-core fiber (MCF) technology has come to attract lots of attention because of its strong applicability to long-haul transmission systems. Compared with weakly-coupled MCFs with independent cores, it can simultaneously realize higher spatial channel density and ultralow transmission loss using existing ultralow-loss single-mode fiber (SMF) core designs. The strong mode coupling characteristics of randomly-coupled MCFs can provide favorable optical properties, such as suppressed accumulation of modal dispersion (MD), mode-dependent loss (MDL), and nonlinear impairments. This article gives an overview of randomly-coupled MCF technology advancements. First, we describe the classification and design of randomly-coupled MCFs and explain what the randomly-coupled MCFs are and how they are designed. State-of-the-art randomly-coupled MCFs can accommodate four, seven, or 12 cores in a standard 125- $\mu$ m cladding while achieving ultralow transmission loss and/or small MD, which are very promising for long-haul transmission media. Next, we present the methods to characterize the optical properties of randomly-coupled MCFs and the difference compared to conventional SMF measurements. We also show the low-loss low-MDL connectivity of this type of MCF and the cabling that can suppress MD. A field-deployed randomly-coupled MCF cable testbed is also presented, which confirmed the favorable optical properties of randomly-coupled MCFs after deployment. Then, multi-core amplifier technologies are briefly summarized, and finally, we discuss the performance improvements in the transmissions over randomly-coupled MCFs and suitable application areas.
25 December 2017 in Journal of Lightwave Technology
Space-Division Multiplexing (SDM) has been intensively proposed in recent years to overcome the capacity limitations of current single-mode fiber infrastructure and to increase the efficiency of optical transmission systems. Few-mode fibers offer the potential of transmitting several signals at the same wavelength over different modes of a fiber with one single core. In this work, we demonstrate the potential of using fewmode fiber based SDM systems for long-haul transmission. We analyze system limitations such as mode-dependent loss and Kerreffect based nonlinear signal distortions for different modulation formats and distances up to 3500 km. We find that modedependent loss poses the major limitation in the analyzed transmission system, masking most intermodal nonlinear interactions.
12 March 2020 in Journal of Lightwave Technology
Conventional optical coherent receivers capture the full electrical field, both amplitude and phase, of a signal waveform by measuring its interference against a stable continuous-wave local oscillator (LO). In optical coherent communications, powerful digital signal processing (DSP) techniques that operate on the full electrical field can undo transmission impairments such as chromatic dispersion (CD), and polarization mixing. Simpler direct detection techniques cannot measure the full electrical field and lack the ability to compensate for these impairments. We present a full-field measurement technique using only direct detection that does not require any beating with a strong carrier (LO). Rather, a phase retrieval algorithm based on alternating projection employing dispersive elements recovers the optical phase from intensity only measurements. In this demonstration, the phase retrieval algorithm is a modified Gerchberg—Saxton (GS) algorithm that achieves a simulated optical signal-to-noise ratio (OSNR) penalty less than 4~dB compared to theory at a bit-error-rate of ${2\times 10^{-2}}$ . With the phase retrieval scheme, we experimentally demonstrate polarization-multiplexed 30-Gbaud QPSK signal detection and equalization using standard 2X2 multiple-input-multiple-output (MIMO) after 520-km standard single-mode fiber (SMF) transmission.
8 March 2023 in Journal of Lightwave Technology
We discuss the use of the fiber channel transfer matrix extracted from a digital coherent receiver for environmental sensing. We show that the polarization rotation vector describing the unitary part of the matrix is highly sensitive to perturbations affecting the optical fiber link. This vector can be readily extracted from the time-dependent transfer matrix reconstructed by the coherent receiver during system operation and may serve as an effective observable to monitor environmental changes.
13 November 2021 in Journal of Lightwave Technology
Few-mode fibers and coupled-core multi-core fibers are attractive transmission media for space-division multiplexed transmission systems as they enable a high spatial channel multiplicity whilst sustaining the current standard cladding diameter. This paper compares space-division multiplexed recirculating loop transmission using either a 3-mode few-mode fiber or a 3-core coupled-core multi-core fiber. After analyzing the spectral attenuation properties of both fibers, we investigate the wavelength and transmission distance dependence of the transmission channel characteristics. We find that the channel memory length is shorter and mode-dependent loss is lower in the coupled-core multi-core fiber, which can be attributed to the fundamental mode-structure differences between the two fiber types. This leads to a higher data rate at similar transmission distance for the coupled-core multi-core fiber.
19 September 2023 in Journal of Lightwave Technology
In recent years, space-division multiplexing (SDM) has been proposed and investigated as a technique to increase the per-fiber capacity in order to cope with the ever-increasing demand for capacity in optical transmission networks. Considering the various SDM architectures proposed, multi-mode fibers potentially allow for the highest spatial channel density, but current demonstrations have been limited to mostly short-distance high-mode count or long-distance low-mode count transmission. In this work, we transmit 15 modes × 184 wavelength channels × 24.5 GBd PDM-16-QAM signals, spanning the full C-band, over 1001 km of 15-mode multi-mode fiber. The resulting net data rate of 273.6 Tb/s is the highest reported data rate in long-distance multi-mode fiber transmission and results in a record capacity-distance product of 273.9 Pb/s · km for multi-mode transmission. This was achieved by using mode multiplexers with low mode-dependent loss (MDL) and insertion loss, as well as a 15-mode fiber optimized for a low differential mode delay (DMD) transmission regime.