Few-mode fibers and coupled-core multi-core fibers are attractive transmission media for space-division multiplexed transmission systems as they enable a high spatial channel multiplicity whilst sustaining the current standard cladding diameter. This paper compares space-division multiplexed recirculating loop transmission using either a 3-mode few-mode fiber or a 3-core coupled-core multi-core fiber. After analyzing the spectral attenuation properties of both fibers, we investigate the wavelength and transmission distance dependence of the transmission channel characteristics. We find that the channel memory length is shorter and mode-dependent loss is lower in the coupled-core multi-core fiber, which can be attributed to the fundamental mode-structure differences between the two fiber types. This leads to a higher data rate at similar transmission distance for the coupled-core multi-core fiber.

Efficient nonlinearity compensation in fiber-optic communication systems is considered a key element to go beyond the “capacity crunch”. One guiding principle for previous work on the design of practical nonlinearity compensation schemes is that fewer steps lead to better systems. In this paper, we challenge this assumption and show how to carefully design multi-step approaches that provide better performance–complexity trade-offs than their few-step counterparts. We consider the recently proposed learned digital backpropagation (LDBP) approach, where the linear steps in the split-step method are re-interpreted as general linear functions, similar to the weight matrices in a deep neural network. Our main contribution lies in an experimental demonstration of this approach for a 25 Gbaud single-channel optical transmission system. It is shown how LDBP can be integrated into a coherent receiver DSP chain and successfully trained in the presence of various hardware impairments. Our results show that LDBP with limited complexity can achieve better performance than standard DBP by using very short, but jointly optimized, finite-impulse response filters in each step. This paper also provides an overview of recently proposed extensions of LDBP and we comment on potentially interesting avenues for future work.

High-capacity, long-haul transmission over a coupled-core three-core multi-core fiber is investigated in a recirculating loop experiment. We report key system characteristics, such as the optimum launch power as well as the wavelength dependence and distance-evolution of mode-dependent loss and the impulse response time spread. We further performed two high data-rate, long-haul transmission demonstrations with more than 75 nm optical bandwidth in C- and L-bands over distances up to 4800~km. The reported data-rate of 172 Tb/s over 2040 km is the highest demonstrated in any multi-span transmission system employing optical fibers with standard cladding diameter of 125 micro-meter to date. Additionally, transmission of 81 Tb/s over 4800 km distance demonstrates the potential of using coupled-core multi-core fibers in combination with wide-band optical signals over long-haul distances.

We propose a new four-dimensional orthant-symmetric 128-ary modulation format (4D-OS128) with a spectral efficiency of 7 bit/4D-sym. The proposed format fills the gap between polarization-multiplexed 8- and 16-ary quadrature-amplitude modulation (PM-8QAM and PM-16QAM). Numerical simulations show that 4D-OS128 outperforms two well-studied 4D geometrically-shaped modulation formats: 128SP-16QAM and 7b4D-2A8PSK by up to 0.65 dB for bit-interleaved coded modulation at the same spectral efficiency. These gains are experimentally demonstrated in a 11×233 Gbit/s wavelength division multiplexing (WDM) transmission system operating at 5.95 bit/4D-sym over 6000 and 9000 km for both EDFA-only and hybrid amplification scenarios, respectively. A reach increase of 15% is achieved with respect to 128-ary set-partitioning 16QAM. Furthermore, the proposed 4D-OS128 is also compared to D ₄ lattice-based constellation, 16QAM and probabilistically-shaped 16QAM with finite blocklength via simulation.

As fiber-optic systems turn toward multi-band transmission (MBT), exploiting the complete low loss window of optical fibers, novel optical components, able to operate in bands other than the conventional C-band, become necessary. In light of this, we report on a multi-band photonic integrated $\mathbf {1\times 2}$ wavelength selective switch (WSS) operating in the O, S, C and L-bands. The photonic integrated WSS presented in this work uses a folded arrayed-waveguide grating (AWG) as the filtering element, while the wideband operation of the thermo-optic switches allows the routing of the individual channels from those bands to any of the device output ports. The operation of the WSS is experimentally validated for different bands and modulation formats. Results show error-free operation with limited penalty with intensity-modulation direct-detection (IM/DD) non-return-to-zero on-off keying (NRZ-OOK) up to 35 Gb/s in O, S, C and L-bands and up to 169.83 Gb/s with coherent 64-quadrature amplitude modulation (QAM) data transmission in the S, C and L-bands.

We demonstrate digital turbulence compensation using a 12-spatial mode digital coherent receiver with a multimode preamplifier that provides a 6-dB sensitivity improvement. This combination acts similarly to ideal lossless adaptive optics. Coherent superposition of 12 spatial-modes reduced median BER from 0.1 to 1×10-5 compared to traditional single-mode detection.