This essay aims to describe technology and mold design for production of hollow composite parts like carbon rims or sport rackets. Tested materials correspond to those used for composites in sport applications. Production technology called inf...
8 May 2017 in Quantitative InfraRed Thermography Journal
The use of infrared thermography for quantitative evaluation of water ingress in aviation honeycomb cells is discussed. Numerical modelling has been performed by analysing a 3D panel model where water fully or partially occupies honeycomb cells. Calculation of several test cases has allowed better understanding of how the thickness of the water layer affects surface temperature anomalies and times of their appearance in active one-sided thermal tests. Experimental results have been obtained on both reference samples and real honeycomb panels.
Jute fabric is well-known reinforcing material in composite science, however, there is a necessity to treat these fabrics to reduce moisture uptake and improve properties. Nevertheless, every modification increases the cost and reduces the possible applications. Presented research deals with an investigation of possibility to use untreated jute in various fabric weight as a reinforcing material in sandwich structures facings. Untreated jute reinforcements and two types of cork cores were saturated in one step during vacuum infusion creating a lightweight sandwich composite. All samples were mechanically tested in three-point bending test. Experimental results showed the most appropriate material combination and produced sandwich structure are proposed for design applications.
Honeycomb composite structures widely used in aviation are sturdy and light-weight but they may accumulate water from the atmosphere during aircraft operation. The presence of water in honeycomb cells leads to a higher airplane mass and excessive corrosion of aluminum cores, while the frozen water endangers panel integrity. This work describes the use of infrared thermography for detecting water trapped in aviation honeycomb cells.
In the present work, mechanical properties of prepreg carbon composites are studied. Five types of composite samples with different number of layers and prepreg material corresponding to material composition used for carbon rims are manufactured by compression molding. Prepared composites are tested and compared with respect to flexural strength and modulus. Furthermore, impact performance using Charpy impact test is also evaluated.