Optical polyimide (PI) membranes have been increasingly attractive in optoelectronic substrate and optical element material applications. Controlled stress distribution is very important to optical PI membrane-based optics. However, nondestructive absolute stress measurement inside optical PI membranes remains challenging. In this letter, we adopted the stress birefringence method to experimentally investigate the correlation between stress and retardation in uniaxially, biaxially, and circularly stretched PI membranes. The calculated value of the photoelastic coefficient was found to be around 400 nm/Mpa·cm. A theoretical model was established where the retardation angle is the negative arctan of the principal stress ratio in the biaxially stretched membrane. We also found that the average retardation angle is an important parameter for evaluating the uniformity of stretching force in the circularly stretched membrane. This work provides a better understanding of the stress birefringence measurement of membrane materials.
Diffractive membrane optics has been expected to meet the requirement of large aperture space-based telescopes. However, the flexible membrane has different properties from traditional materials that the desired geometrical form is hardly obtained by current ultra-precision surface manufacturing technologies. A 400 mm aperture membrane substrate was figure-corrected by reactive ion etching from the initial figure error of 105 nm rms to the final figure error of ∼17 nm rms in total effective figuring time of ∼7.5 minutes. The RIE figuring technique with high position accuracy, nanometer level repeatability, and parallel removal manner has exhibited huge potential in figure correction.
The etching uniformity of diffractive membrane optical elements with an irregular shape was investigated. A deteriorative uniformity of electron number density and electron temperature was found according to finite element analysis of plasma discharge. A designable equivalent electrode was proposed to weaken the influence of introducing the unconventional, irregular sample. Improved uniformity of etching depths was demonstrated experimentally, assisting by the designable equivalent electrode. The demonstration of the designable equivalent electrode provides a beneficial solution for the fabrication of unconventional optical elements and an effective means for adjusting and controlling plasma characteristics.
6 September 2022 in IEEE Photonics Technology Letters
A quartz sub-mirror was figure-corrected in a parallel removal process for the first time. An Reactive Ion Figuring (RIF) process with a simple and universal masking method was demonstrated, and the 350-mm quartz sub-mirror was figure-corrected from the initial figure error of ~23 nm RMS to the final figure error of ~8 nm RMS in total effective figuring time of ~52 minutes after 4 iterations, which exhibited the actual potential of RIF on the figure-correction of quartz optical elements and the possibility on applying RIF to meet the requirement of mass production for sub-mirrors of transmissive diffractive segmented telescopes.