9 September 2023 in Bioresource Technology
Production of volatile fatty acids from food waste and lignocellulosic materials has potential to avoid emissions from their production from petrochemicals and provide valuable feedstocks. Techno-economic and life cycle assessments of using food waste and grass to produce volatile fatty acids through anaerobic digestion have been conducted. Uncertainty and sensitivity analysis for both assessments were done to enable a robust forecast of key-aspects of the technology deployment at industrial scale. Results show low environmental impact of volatile fatty acid with food wastes being the most beneficial feedstock with global warming potential varying from -0.21 to 0.01 CO2 eq./kg of product. Food wastes had the greatest economic benefit with a breakeven selling price of 1.11-1.94 GBP/kg (1.22-2.33 USD) of volatile fatty acids in the product solution determined through sensitivity analysis. Anaerobic digestion of wastes is therefore a promising alternative to traditional volatile fatty acid production routes, providing economic and environmental benefits.
23 December 2023 in The International Journal of Life Cycle Assessment
JGJose Luis Hernandez Galvan
Jose Luis Hernandez Galvan
Purpose: This research aims to critically assess the suitability of current ISO life cycle assessment standards and practices for the challenges of decarbonisation through the use of carbon capture and the circular economy. Currently, the handling of wastes, including carbon dioxide, in life cycle assessment varies from sector to sector. We propose several methodological innovations to improve transparency and comparability of life cycle assessments to aid in the decarbonisation transition. Methods: Three approaches have been used to analyse the shortcomings of life cycle assessment for carbon capture and circular practices: Recent standards and practices have been assessed to determine their suitability for decarbonisation; Life cycle assessment and industry experts were consulted through a workshop held at the University of Bath in September of 2022; Case studies of industrial decarbonisation projects funded by IDRIC have been conducted to apply solutions to the shortcomings identified through the former methods. The issues identified have been categorised into three key areas: (i) guidelines and standards; (i) temporal and regional issues and (iii) data quality analysis. Results and discussion: The methods of handling carbon capture, waste valorisation and circular practices were found to vary significantly from sector to sector. Temporal aspects are frequently aggregated in a specific point of time, leading to low resolution by neglecting emissions over the duration of the process that creates them. Regionalisation was found to be hampered by regional characterisation factors being representative of larger regions but unsuitable at county or state scale. Uncertainty and sensitivity analyses, which are key to assessing the validity of the impacts of new and emerging technologies, were found to be neglected or only partially conducted. Conclusions and recommendations: The ISO life cycle assessment standards require updating to provide consistency in methodologies to make them suitable for use with carbon capture and circular systems and to avoid ambiguity. We recommend that the life cycle assessment community focuses on developing more consistent standards and practices between sectors to address carbon capture and circularity; improving the implementation of temporal aspects of impacts; increasing the number of studies including uncertainty and sensitivity analyses and moving towards global uncertainty in favour of local sensitivity. Graphical
23 September 2024 in Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences
The overarching purpose of carbon accounting is to reduce carbon emissions to meet net-zero targets and minimize the impact of climate change. However, the plethora of methods and approaches used means that products and systems sometimes cannot easily be compared. The mix of regional and life cycle-based systems can mean that we lack global oversight of our emissions and impact. In some situations where a regional approach is used, industry/business/regions are incentivized to reduce their own/territorial emissions, which can mean that an optimal global solution is not adopted. Countries where grid emissions are higher can be selected for production because it reduces regional (not global) carbon levels. Furthermore, these can be areas where the climate impact may be felt the most: not the just transition we aspire to. Our work provides an analysis of the current system together with its challenges and limitations, paving the way towards a more unified framework to create climate justice together with transparent and comparable accounting methodology for industry and regions alike. This article is part of the discussion meeting issue ‘Green carbon for the chemical industry of the future’.
22 November 2025 in Cleaner Food Systems
10 October 2022 in Chemical Engineering Research and Design
LSLukasz Michal Starnawski
2 May 2025 in Expert Systems with Applications
LSLukasz Michal Starnawski