In a wireless charging system, non-alignment has been a big problem that affects the transmission efficiency. The uniform magnetic field can ensure the charging power stability and extension of battery life in a multi-load wireless charging system, which also expands the free charging area of the loads. In this article, the array circular coils of wireless power transfer (WPT) with a compensation structure have been proposed, which can be obtained by analyzing the magnetic field trajectory of the elementary unit of the array coils. Larger scale of the uniform magnetic field could be expended by the joint of several elementary units. The correctness and validity of the structure are verified by theoretical derivation and finite element simulation. Besides, the compensation method could be used for any forms of array coils.
The operational flexibility of unmanned aerial vehicles (UAVs) can be considerably improved by wireless charging without manual intervention in battery charging. To ensure the stability of power receipt, the free-position wireless charging system of UAVs should be designed with urgency. In this article, a numerical definition of a uniform magnetic field and its criteria are presented. Furthermore, two methods, the valley-filling method (VFM) and peak-clipping method (PCM), are introduced to modulate the magnetic flux based on a uniform magnetic field. The correctness of the structures proposed to promote misalignment tolerance has been confirmed by simulations and experiments. The results show that the misalignment tolerance achieved with the employment of the PCM is better than that of other methods, which could keep the transmission efficiency stable when the UAV is horizontally offset.
Integrated process instead of surface mounted technology can reduce high-frequency parasitic effect of common components and improve the reliability of printed circuit board. In this work, a real-time monitoring technology was developed to test the resistance values of integrated resistors. Ni-P film resistors monitored under the real-time monitoring technology were integrated on epoxy resin surface by electroless plating method. The surface morphology of Ni-P film resistor deposited at different temperature were characterized by SEM. The influence of Ni-P film resistor shapes on resistance error was analyzed. The results show that the integrated Ni-P film resistor has the minimum resistance error of 3.2 % when the electroless plating bath temperature is at 80 °C. The resistance error of arbitrary shapes is controlled within 5 %. The Laminate process, thermal shock and thermal recycling experiments confirm that integrated Ni-P film resistors possess excellent thermal and mechanical stability. These interesting features indicate that integrated Ni-P film resistors monitored under the real-time monitoring technology have tremendous potential in manufacture of PCB with high reliability and high precision resistors.
1 January 2026 in IEEE Transactions on Industrial Informatics