Antonio Malacarne

Antonio Malacarne

Auto-generated profile, based on publicly available information

Antonio Malacarne

CNIT

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
21 January 2019 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
Giovanni SerafinoGiovanni Serafino
Giovanni Serafino
FSFilippo Scotti
Filippo Scotti
LLLeonardo Lembo
Leonardo Lembo
BHBilal Husain
Bilal Husain
Claudio PorziClaudio Porzi
Claudio Porzi
Antonella BogoniAntonella Bogoni
Antonella Bogoni
This paper reviews on the latest advances in microwave photonics applied to radar systems, tracing the evolutions of functionalities in the photonic radar toward a new generation of enhanced-performance systems. Photonics is demonstrated to enable a new generation of miniaturized, heterogeneous and distributed radars, i.e. future radars on chip with different features, working in different radio spectral regions, and organized in spatially distributed sensors for the enhanced detection of a wider range of target properties. In these systems, the use of photonics assures benefits in terms of frequency flexibility, accuracy and computational load reduction. Innovative capabilities supported by the photonic approach are presented, such as the use of coherent sparse bands for the synthesis of ultra-wide bands, the use of distributed sensors for multiple-input multiple-output detections, and the use of an ultra-wide band photonics-based receiver for radio frequency (RF) spectrum scanning. The presented novel concepts will open the way to new research activities both in photonic technology and radar systems, contributing to the development of a new generation of remote sensing systems. This expanding cross-fertilization will lead to exciting and challenging research activities in the years to come.

13 December 2017 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
AMAntonio Malacarne
Antonio Malacarne
CNChristian Neumeyr
Christian Neumeyr
WSWouter Soenen
Wouter Soenen
FFFabio Falconi
Fabio Falconi
CPClaudio Porzi
Claudio Porzi
ABAntonella Bogoni
Antonella Bogoni
Long-wavelength vertical-cavity surface-emitting lasers (LW-VCSELs) with emission wavelength in the 1.3-μm region for intensity modulation (IM)/direct detection optical transmissions enable longer fiber reach compared to C-band VCSELs, thanks to the extremely low chromatic dispersion impact at that wavelength. A lot of effort has been recently dedicated to novel cavity designs in order to enhance LW-VCSELs' modulation bandwidth to allow higher data rates. Another approach to further improve VCSEL-based IM speed consists of making use of dedicated driver circuits implementing feedforward equalization (FFE). In this paper, we present a transmitter assembly incorporating a four-channel 0.13-μm SiGe driver circuit wire-bonded to a novel dual 1.3-μm VCSEL array. The short-cavity indium phosphide buried tunnel junction VCSEL design minimizes both the photon lifetime and the device parasitic currents. The integrated driver circuit requires 2.5-V supply voltage only due to the implementation of a pseudobalanced regulator; it includes a two-tap asymmetric FFE, where magnitude, sign, relative delay, and pulse width distortion of the taps can be modified. Through the proposed transmitter, standard single-mode fiber reach of 20 and 4.5 km, respectively, for 28- and 40-Gb/s data rate has been demonstrated with state-of-the-art power consumption. Transmitter performance has been analyzed through pseudorandom bit sequences of both 2 7 -1 and 2 31 -1 length, and the additional benefit due to the use of the driver circuit has been discussed in detail. A final comparison with state-of-the-art VCSEL drivers is also includedt.

13 February 2009 in Optics Letters
Verified
Journal Article
Closed access
PDF file
STSaju Thomas
Saju Thomas
AMAntonio Malacarne
Antonio Malacarne
FFFrancesco Fresi
Francesco Fresi
Luca PotìLuca Potì
Luca Potì
ABAntonella Bogoni
Antonella Bogoni
JAJosé Azaña
José Azaña
We demonstrate a fiber-based programmable arbitrary picosecond optical pulse shaper using binary phase-only linear filtering. The reconfigurable filtering operation is implemented in the time domain using an electro-optical phase modulator driven by a high-speed bit pattern generator. The required binary phase code is designed using a genetic algorithm. Precise matching between the predispersive and postdispersive media in the system is achieved by use of a single linearly chirped fiber Bragg grating subsequently operated from its two input ends. As a proof of concept, different pulse waveforms of practical interest are generated using this new pulse shaper.

9 October 2012 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
ELEmma Lazzeri
Emma Lazzeri
AMAntonio Malacarne
Antonio Malacarne
Giovanni SerafinoGiovanni Serafino
Giovanni Serafino
Antonella BogoniAntonella Bogoni
Antonella Bogoni
An all-optical scheme based on periodically-poled lithium niobate (PPLN) waveguide for signal processing of the in-phase (I) and quadrature (Q) components of an input quadrature phase shift keying (QPSK) signal is presented. The device is able to work on the I and Q components without any additional demodulation stage, and makes use of cascaded second harmonic and difference frequency generation in the PPLN to obtain the logical operation xor (I, Q). A single continuous wave signal is needed in addition to the input signal to generate the output signal, in which the information is coded in a binary phase shift keying modulation. The logical xor (I, Q) potentially enables data coding, error detection, and encryption of sensitive information in all-optical networks. Bit error rate measurements are provided to evaluate the system performance for a 20-Gb/s differential-QPSK input signal, and tunability of the output wavelength has been attested with almost constant optical signal-to-noise-ratio penalty along the C-band.

10 July 2020 in Optics Letters
Verified
Journal Article
Closed access
SMSalvatore Maresca
Salvatore Maresca
FSFilippo Scotti
Filippo Scotti
GSGiovanni Serafino
Giovanni Serafino
LLLeonardo Lembo
Leonardo Lembo
AMAntonio Malacarne
Antonio Malacarne
ABAntonella Bogoni
Antonella Bogoni
The conventional concept of radar is based on stand-alone and independent apparatuses. Superior performance is possible, exploiting distributed points of view (i.e., distributed radars) and centralized data fusion, but systems based only on radio-frequency technology are not able to guarantee the requested degree of coherence and high capacity links among radars. In the current distributed systems, radars act almost independently from each other. Thus, data fusion, which must be performed on locally pre-processed information, can only exploit partial information content, harming the imaging capability of the distributed system. Here we present, to the best of our knowledge, the first extended analysis and experiment of a distributed coherent multiple input-multiple output radar system, enabled by photonics, which maximizes the information content extracted by a centralized data fusion, providing unprecedented resolution capabilities. Stepping from previous achievements, where photonics has been demonstrated in single radars, here photonics is used also for providing coherence and high capacity links among radars. The numerical analysis also demonstrated the benefits of coherent multi-band operation for sidelobe reduction, i.e., false alarms reduction.

24 July 2020 in Journal of Lightwave Technology
Verified
Journal Article
Closed access
AMAntonio Malacarne
Antonio Malacarne
SMSalvatore Maresca
Salvatore Maresca
FSFilippo Scotti
Filippo Scotti
PGPaolo Ghelfi
Paolo Ghelfi
GSGiovanni Serafino
Giovanni Serafino
Antonella BogoniAntonella Bogoni
Antonella Bogoni
Today, the advent of radar sensing in applications requiring ever higher precision, such as automotive and industrial monitoring, needs the development of systems with superior resolution, stability and accuracy on 2D/3D spaces. Multiple-input multiple-output (MIMO) radar systems have been studied for more than twenty years, proving to achieve excellent resolutions by merging simultaneous observations from sparse multiple radars. In addition, long-term frequency/phase coherence among distributed signals to and from remote and widely distributed radar frontends, enables a centralized architecture where, in a common base station (BS) site, all the received signals can be coherently processed in synergy, allowing to further improve detection, localization and imaging capabilities. Radio-over-fiber (RoF) solutions represent an enabling technology for guaranteeing coherence among all radar signals coherently generated in the BS and distributed/collected to/from the radar heads by means of optical fiber links. Despite the unprecedented frequency-agility provided by photonics-based radiofrequency (RF) up-/down-conversion in the optical domain, for applications requiring massive low-cost production and power efficiency, such as advanced driver-assistance systems, it might be convenient to transmit and receive conventionally generated RF signals, and to limit the use of photonics, as in RoF, to RF signal distribution through cheap high-capacity optical links, in order to avoid EM interference, minimize loss, signal distortion and link encumbrance, still keeping the coherence among distributed signals. In this work, we present a MIMO radar-over-fiber (RaoF) network, where a common BS transmits and receives RF signals through optical standard single-mode fiber (SSMF), to and from two remote radar transmitters (TXs) and four receivers (RXs), all remote with respect to the BS and distributed on a 3m-long baseline, and employing cheap patch antennas. Electro-optic conversion is achieved through direct modulation (DM) of low-cost, power-effective and high-speed vertical-cavity surface-emitting lasers (VCSELs) working in the 1.3 μm-wavelength regime. Such a wavelength ensures propagation over SSMF with negligible distortions up to the km-range. The system is tested in a down-scaled indoor scenario and an RF carrier of 8.5 GHz is used, due to the limited frequency response of the employed VCSELs. System performance is evaluated with 1.4 GHz-bandwidth signals, comparing non-coherent and coherent signal elaboration. In addition, dual-band operation in the same RF region is tested, confirming that VCSEL-based optical links are a viable way to guarantee phase coherence among the distributed signals and among multiple frequency bands. Coherent MIMO processing also confirm the potential to achieve superior range and cross-range resolution than non-coherent data fusion.