As a result of energy assessment of a pneumatic sieve separator for agricultural crops it was determined that the specific energy consumption of the experimental pneumatic sieve separator was 0.18 kW·year·t −1 . It is lower than in case of its domestic and foreign equivalents. For instance, the specific energy consumption of the separator of preliminary grain purification called SPO-50 (Ukraine) is 0.31 kW·year·t −1 , and that of the machine of preliminary grain purification called MPO-50 (Russia) is 0.38 kW·year·t −1 . Specific energy consumption of a pneumatic sieve separator is 1.72-2.11 times lower than in case of its domestic and foreign counterparts.
The analysis of statistical data showed that a large amount of plant waste is generated annually in oil and fat production plants, which must be processed and reused. The paper analyzes the problems of reusing sunflower oil production waste, which is characterized by a relatively high energy value: 1 ton of plant waste is equivalent to 0.625 tons of conventional fuel. According to the mathematical estimation, the actual total amount of impurities is 7.29%, in which major impurities constitute 25.7%. Studies have shown a high probability of oil – containing impurities – 37.25%. Therefore, it is recommended to process such impurities into fuel briquettes and technical oil to increase the profitability of sunflower oil production. For example, at the annual load of technological equipment of the Melitopol Oil Extraction Plant, in 250 days, at a daily processing capacity of 550 t˙day -1 , an annual profit of 560,000 EUR is obtainable from the sunflower grain impurities processed into fuel and technical oil.
The research was aimed at reducing the power consumption for grain cleaning by using energy-saving modes in the electromechanical systems of grain cleaning units. Specific consumption of active energy per production unit was adopted as a criterion for assessing energy-saving operation modes. The applied method of mathematical experiment planning (MEP) reduced the number of experiments to a minimum to obtain a reliable mathematical model of the research object. To determine the optimal specific power consumption, a theoretical method was developed to rebuild the mathematical model. Thus, the minimum specific power consumption of grain cleaning production lines was obtained, which allowed developing science-based rates of power usage that allow energy savings up to 8-10%.