16 April 2025 in IEEE Transactions on Instrumentation and Measurement
This paper introduces an FPGA-based time-to-digital converter with an online dual-chain calibration method to address time resolution and linearity issues arising from the non-uniformity of FPGA internal delay elements. The aim is to enhance the stability and accuracy of time-to-digital converters under varying environmental conditions. We employ an external high-precision clock to generate start-stop calibration signals for real-time monitoring of signal propagation time changes within FPGA components. Two identical delay chains in the time-to-digital converter are managed by a Finite State Machine to switch their roles, ensuring continuous data acquisition and online calibration. Experimental results show that the proposed time-to-digital converter significantly outperforms traditional time interval counter in terms of time linearity, maximum integral nonlinearity, and differential nonlinearity. Within a temperature range of 20°C to 80°C, post-online temperature calibration maintains the root mean square of the TDC below 20 ps, substantially improving performance across different temperature conditions.
25 May 2023 in IEEE Transactions on Instrumentation and Measurement
By considering the observation samples of a hydrogen maser relative to an optical clock with time-varying variances, this paper proposes an optimized predictor based on the finite impulse response (FIR) to improve the predictability of hydrogen masers. The design idea and rationality of the predictor were characterized from a theoretical viewpoint, showing its potential predictability for missing partial measurement data or unequal interval measurement data. The prediction results for simulated hydrogen masers reveal its comparable predictability with least squares method (LS). As proof of concept, it was applied to the actual data of typical hydrogen maser relative to a 87 Sr optical lattice clock developed by the National Institute of Metrology (NIM). Compared with the LS, the prediction error after 7 days obtained by the proposed method is ~40 ps smaller than LS.
4 March 2026 in GPS Solutions