Kornelia Zemke

Kornelia Zemke

Auto-generated profile, based on publicly available information

Kornelia Zemke

Rock characterization for storage and final disposal, Federal Institute for Geosciences and Natural Ressources (BGR), Stilleweg 2, 30655 Hannover, Germany

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 September 2023 in Safety of Nuclear Waste Disposal
Verified
Journal Article
Open access
LFLarissa Friedenberg
Larissa Friedenberg
JBJeroen Bartol
Jeroen Bartol
JBJames Bean
James Bean
SBSteffen Beese
Steffen Beese
HBHendrik Bollmann
Hendrik Bollmann
KZKornelia Zemke
Kornelia Zemke
For the underground disposal of high-level nuclear waste in rock salt formations, the safety concept includes the backfilling of open cavities with crushed salt. For the prognosis of the sealing function of the backfill for the safe containment of the radioactive waste, it is crucial to have a comprehensive process understanding of the crushed-salt compaction behavior. The crushed-salt compaction process is influenced by internal properties (e.g., grain size, mineralogy, and moisture content) and boundary conditions (e.g., temperature, stress state, and compaction rate) and, therefore, involves several coupled thermal–hydro–mechanical (THM) processes (Hansen et al., 2014; Kröhn et al., 2017). With the paradigm shift from the limited release of radionuclides to safe containment due to the German Repository Site Selection Act passed in 2017, the importance of crushed salt as geotechnical barrier has increased, with a focus on the evolution of its hydraulic properties. Based on the knowledge gaps in the current process understanding, the “Compaction of crushed salt for safe containment” (KOMPASS) projects were initiated to improve the scientific basis behind using crushed salt for the long-term isolation of high-level nuclear waste within rock salt repositories. The efforts to improve the prediction of crushed-salt compaction begun during the first phase of the KOMPASS projects (Czaikowski et al., 2020) and were followed up in a second phase ending in June 2023. The primary achievements of the projects are as follows (Czaikowski et al., 2020; Friedenberg et al., 2022): specification of the KOMPASS reference material, an easily available and reproducible synthetic crushed-salt material, for generic investigations; development of pre-compaction methods and successful production of samples in the short term and under in situ loading conditions; formulation of an extended laboratory program addressing the isolated investigation of known relevant factors influencing the compaction behavior of crushed salt (Düsterloh et al., 2022); execution of long-term compaction tests addressing isotropic and deviatoric load changes, temperature, and compaction state; construction of a backfill body using the KOMPASS reference material in the Sondershausen mine through collaboration with the SAVER (Entwicklung eines salzgrusbasierten Versatzkonzepts unter der Option Rückholbarkeit) project (Schaarschmidt and Friedenberg, 2022); advancement of the tools for microstructure investigation methods (Svensson and Laurich, 2022); generation (first stages) of a microphysical process list combining literature research with our own findings; benchmarking of long-term compaction test for model development and optimization of various existing models as well as the development of new models; application of a virtual demonstrator (2D model representing a backfilled drift in rock salt) for the visualization of developments and the quantification of the models (Rabbel, 2022). In summary, the KOMPASS projects contributed to the reduction of uncertainties and the strengthening of the safety case for using crushed salt within rock salt repositories.

15 July 2025
Verified
Conference Paper
Open access
SMSibylle Mayr
Sibylle Mayr
WGWerner Gräsle
Werner Gräsle
KZKornelia Zemke
Kornelia Zemke
Since primary and especially secondary creep is the dominating deformation mechanism of rock salt, the latter one is used as direct indicator for evaluation of possible sites for a repository for heat generating nuclear waste in Germany. For determination of long-term stability of these repositories, the creep of salt over long periods have to be well known. Next to the mechanisms described in constitutive laws, corresponding parameters are to be determined. At higher differential stress Δσ = σmax - σmin, the dislocation creep (DC), e.g. Hunsche and Hampel (1999), is effective. A power law can describe it, and deformation rate dε/dt is easy measurable in laboratory. The rate dε/dt is proportional to Δσn , with n=5-7. The exponent is depending on rock salt type and e.g. content of anhydrite and other minerals. Numerous measurements to calibrate the constitutive laws for description of the DC are available. For low differential stress, the pressure solution creep (PSC), e.g. Urai and Spiers (2007), is the dominating process. The deformation rate dε/dt is proportional to differential stress Δσ. Next to e.g. temperature, it additionally depends on grain size. As the deformation rate is very small, only a few measurements (e.g. Berest et al. 2019, 2023; Blanco-Martín et al., 2024) at extremely low differential stress are available to verify and calibrate the constitutive law.At BGR various data is available for the analysis of possibilities and challenges during the determination of creep rates. On one hand, numerous measurements on e.g. salt from Waste Isolation Pilot Plant (WIPP) and the Morsleben repository site (ERAM) are available, which can be used for calibration of the DC. Although the salt from WIPP-site is bedded salt and from ERAM-site is domal salt, the measurement results do not differ significantly. On the other hand a few measurements on ERAM salt at differential stresses and low temperature (DΔσ = 5 MPa at T = 21°C & and 3 MPa at T= 25°C) are available. They had a duration of up to 40 months and thus give insights into the development of creep over a long period of time.Processes at small differential stresses dominate the long-term behavior of a final repository. Further measurements at low stresses and simultaneous analyses, e.g. of moisture and microstructure, are therefore necessary as a basis for well-founded long-term safety analyses at different locations.ReferencesBérest, P., H. Gharbi, L. Blanko-Martín, et al. 2023. Rock Mechanics and Rock Engineering.Bérest, P., H. Gharbi, B. Brouard, et al. 2019. Rock mechanics and rock engineeringBlanko-Martín, L., A. Rouabhi, F. Hadj-Hassen, et al. 2024. Rock mechanics and rock engineeringHunsche, U., and A. Hampel. 1999. Engineering geologyUrai, J. L., and C. J. Spiers. 2007. Paper read at 6th Conference on the Mechanical Behavior of Salt at Hannover.

10 November 2021 in Safety of Nuclear Waste Disposal
Verified
Journal Article
Open access
PDF file
LFLarissa Friedenberg
Larissa Friedenberg
JBJames Bean
James Bean
OCOliver Czaikowski
Oliver Czaikowski
UDUwe Düsterloh
Uwe Düsterloh
NMNina Müller-Hoeppe
Nina Müller-Hoeppe
JZJuan Zhao
Juan Zhao
In Germany, rock salt formations are possible host rock candidates for a repository for heat-emitting radioactive waste. The safety concept of a repository in salt bases on a multibarrier system consisting mainly of the geological barrier salt and geotechnical seals ensuring safe containment. Crushed salt will be used for backfilling of cavities and sealing measures in drifts and shafts due to its favourable properties and its easy availability (mined-off material). The creep of the rock salt leads to crushed salt compaction with time. Thereby, the crushed salts' porosity is reduced from the initial porosity of 30 %–40 % to a value comparable to the porosity of undisturbed rock salt (≤1 %). In such low porosity ranges, technical impermeability is assumed. The compaction behaviour of crushed salt is rather complex and involves several coupled THM processes (Kröhn et al., 2017; Hansen et al., 2014). It is influenced by internal properties like humidity and grain size distribution, as well as boundary conditions such as temperature, compaction rate or stress state. However, the current process understanding has some important gaps referring to the material behaviour, experimental database and numerical modelling. It needs to be extended and validated, especially in the low porosity range. The objective of the KOMPASS project was development of methods and strategies for the reduction of deficits in the prediction of crushed salt compaction leading to an improvement of the prognosis quality. Key results are as follows (KOMPASS Phase 1, 2020): selection of an easily available and permanently producible synthetic crushed salt mixture, acting as a reference material for generic investigations; development and proof of different techniques for producing pre-compacted samples for further investigations; establishment of a tool of microstructure investigation methods to demonstrate the comparability of grain structures of pre-compacted samples with in-situ compacted material for future investigations; execution of various laboratory experiments using pre-compacted samples, e.g. long-term creep tests which deliver reliable information about time- and stress-dependent compaction behaviour; development of a complex experimental investigation strategy to derive necessary model parameters considering individual functional dependencies. Its technical feasibility was successfully verified; benchmarking with various existing numerical models using datasets from three different triaxial long-term tests. The result was not entirely satisfactory; however, the number of influencing factors is small and further validation work has to be done. Overall, the KOMPASS project has made significant progress in the approaches to solving the outstanding question, building the basis for further investigations.

10 November 2021 in Safety of Nuclear Waste Disposal
Verified
Journal Article
Open access
PDF file
KSKristoff Svensson
Kristoff Svensson
KZKornelia Zemke
Kornelia Zemke
BLBen Laurich
Ben Laurich
Following 30 years of research, it is common sense that crushed salt is the most suitable geotechnical material for encapsulating radioactive waste in a rock salt repository (e.g., Chaikowski et al., 2020). After emplacement, it provides sufficient permeability to allow outflow of unwanted canister-corrosion gases. In the long term, however, when it becomes compacted by converging cavity walls, it safely hinders any fluid flow from and to the waste. Hence, it is essential to know the evolution of (1) the material's key parameters during compaction, such as porosity and permeability, backfill resistance and viscosity; (2) the material's response to environmental controls, such as temperature, humidity, and stress; and (3) the material's long-term rheology. Here we align microstructural deformation indicators with physical processes that underlie compaction (Mills et al., 2018a). We strive to identify and – where feasible – to quantify the dominant deformation mechanisms (Blenkinsop, 2002; Jackson and Hudec, 2017). As a preliminary result, we show that the abundancy of deformation indicators increases with increasing compaction state. In early compaction, we observe more brittle mechanisms, such as grain fracturing (Fig. 1a) and cataclastic flow. At later stages, especially in the presence of moisture, plastic deformation overtakes. Therein, we observe an increased presence of indicators for pressure solution precipitation (grain boundary seams) and dislocation creep (subgrain formation, Fig. 1b), with progressing deformation. In our upcoming work, we aim at linking the observed indicators to environmental controls, such as moisture content, temperature, and strain rate by applying our approach to larger suits of samples compacted under best-known controlled conditions. Final goal is the joint interpretation with findings from in situ-compacted material (Mills et al., 2018b). Do lab tests mimic in situ processes of crushed salt compaction adequately? Can we learn how to do better by means of microstructural investigations?

10 November 2021 in Safety of Nuclear Waste Disposal
Verified
Journal Article
Open access
PDF file
KZKornelia Zemke
Kornelia Zemke
KSKristoff Svensson
Kristoff Svensson
BLBen Laurich
Ben Laurich
JLJohanna Lippmann-Pipke
Johanna Lippmann-Pipke
Repositories for high-level radioactive waste in geological formations require knowledge on thermal, mechanical and fluid transport properties of the whole repository system, including the engineered barriers and backfill materials. For about 30 years, crushed salt has been considered the most suitable geotechnical barrier material to backfill cavities and encapsulate radioactive waste in rock salt repository sites (e.g., Czaikowski et al., 2020). Over time, when the surrounding cavity walls converge by the creep of salt, it can become strongly compacted and safely encapsulates radioactive waste from any fluid flow. Hence, crushed salt has been characterized in detail for its physical material properties and its response to environmental controls (stress, temperature and moisture). This characterisation provides a basis for long-term numerical simulations (e.g., Liu et al., 2018), which verify so-called safety cases in radioactive waste disposal. Displacement-controlled oedometric compaction tests mimic the long-term in situ behaviour of crushed salt. The tests show that it can be compacted to a state comprising physical rock properties similar to natural rock salt. In general, compaction is easier with an increase in humidity and temperature (e.g., Stührenberg, 2007; Kröhn, et al., 2017). Triaxial test series address the compactions' response to differing confining pressures and help to identify generalized constitutive equations for crushed salt. Both BGR procedures, the oedometric and the triaxial compaction, are verified by the German accreditation body (DAkkS). Figure 1 illustrates the history of oedometric tests at the BGR laboratory since 1993, which examined crushed salt from various origins and differing temperature conditions. Most tests focused on material from the Asse mine, revealing the compactions' response to the materials' humidity and to brine flow. Moreover, systematic test series with synthetic grain size distributions and bentonite additives provided a basis for barrier material design. More recent tests on bedded salt formations (e.g., Teutschenthal and Sondershausen mines) allow the differentiation from characteristics from domal salt deposits (e.g. Gorleben). The current research continues the history of oedometric and triaxial tests, but has a new focus on late compaction stages with marginal remaining porosities (<5 %). The approach of systematic material characterization under best-controlled conditions essentially benefits from the international research collaboration in the KOMPASS project (Czaikowski et al., 2020). The aim of its current phase two is to synthetically generate, identify and quantify dominant grain-scale deformation processes in response to changes in environmental controls. Subsequently, these laboratory results will be embedded in numerical models on the long-term in situ rheology of crushed salt.