Kristoff Svensson

Kristoff Svensson

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2018 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KSKristoff Svensson
Kristoff Svensson
ANAndreas Neumann
Andreas Neumann
FMFlora Feitosa Menezes
Flora Feitosa Menezes
CLChristof Lempp
Christof Lempp
Herbert PöllmannHerbert Pöllmann
Herbert Pöllmann
The reaction of wollastonite (CaSiO3) with CO2 in the presence of aqueous solutions (H2O) and varied temperature conditions (296 K, 323 K, and 333 K) was investigated. The educts (CaSiO3) and the products (CaCO3 and SiO2) were analyzed by scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), and differential scanning calorimetry with thermogravimetry coupled with a mass spectrometer and infrared spectrometer (DSC TG/MS/IR). The reaction rate increased significantly at higher temperatures and seemed less dependent on applied pressure. It could be shown that under the defined conditions wollastonite can be applied as a cementitious material for sealing wells considering CCS applications, because after 24 h the degree of conversion from CaSiO3 to CaCO3 at 333 K was very high (>90%). As anticipated, the most likely application of wollastonite as a cementitious material in CCS would be for sealing the well after injection of CO2 in the reservoir.

8 March 2019 in SN Applied Sciences
Verified
Journal Article
Open access
PDF file
KSKristoff Svensson
Kristoff Svensson
ANAndreas Neumann
Andreas Neumann
FMFlora Feitosa Menezes
Flora Feitosa Menezes
CLChristof Lempp
Christof Lempp
HPHerbert Pöllmann
Herbert Pöllmann
Wollastonite can be used as cementitious material, for example in carbon capture and storage (CCS application). The interaction of wollastonite (CS) and pure CO2 in the presence of H2O at temperature (333 K) relevant to injection conditions for CCS were investigated within the joint BMWi research project CLUSTER. The reaction which describes the formation of wollastonite during metamorphism, is reversed. Wollastonite reacts in the presence of CO2-pressure under aqueous conditions to form calcium carbonate and amorphous silicon oxide. To determine the driving force for this reaction it is important to investigate the impact of CO2 pressure (p) and temperature (T). The reaction kinetics of the carbonation reaction of wollastonite is strongly dependent to temperature. At 333 K and 2 MPa CO2 the \({\bar{\text{C}}}\)CS reaction is fast (≤ 24 h). The chemical composition of wollastonite was analyzed by X-ray fluorescence. To determine the conversion rate of the reaction quantitatively powder X-ray diffraction with Rietveld method were applied. For further application, it is important to understand the specific reactions during the carbonation. Therefore, the influence of different treatments on wollastonite raw material (hydrochloric acid, acetic acid and temperature), before the carbonation experiments, on the carbonation reaction were investigated. The conversion of wollastonite, depending on temperature, was performed successfully. It could be proven, that aragonite acted as seed crystal for further aragonite formation. Furthermore, indications for the formation of aragonite out of amorphous CaCO3 were observed.

26 March 2019 in Applied Sciences
Verified
Journal Article
Open access
PDF file
KSKristoff Svensson
Kristoff Svensson
ANAndreas Neumann
Andreas Neumann
FMFlora Feitosa Menezes
Flora Feitosa Menezes
CLChristof Lempp
Christof Lempp
Herbert PöllmannHerbert Pöllmann
Herbert Pöllmann
The reaction of wollastonite with CO2 accompanied by SO2 and NO2 in the presence of a chloride-rich brine (230 g/L NaCl, 15 g/L CaCl2, 5 g/L MgCl2) at temperatures relevant to injection conditions (333 K) in carbon capture and storage (CCS) were investigated within the joint BMWi (Federal Ministry for Economic Affairs and Energy) research project CLUSTER. The reaction which describes the formation of wollastonite during metamorphism is reversed and shows a strong temperature dependence. Wollastonite reacts in the presence of CO2 ( C ¯ ) in aqueous conditions to form calcium carbonate and amorphous silicon oxide. At 333 K and 2 MPa the carbonation reaction of wollastonite ( C ¯ C S ) is fast (<24 h). To determine the conversion rate of the reaction quantitatively different methods were used and compared: Powder X-ray diffraction (PXRD) with the Rietveld method and differential scanning calorimetry with thermogravimetry, coupled with a mass spectrometer (DSC-TG/MS) for quantitative phase analysis and for determination of the carbonation. The carbonation (CO2 accompanied by SO2 and NO2) of natural wollastonite at 333 K in presence of chloride-rich brine was rather fast (almost complete after 24 h reaction time).

1 January 2019 in Tecnologia em Metalurgia, Materiais e Mineração
Verified
Journal Article
Open access
WBWoshington da Silva Brito
Woshington da Silva Brito
ASAndré Luis Mileo Ferraioli Silva
André Luis Mileo Ferraioli Silva
KSKristoff Svensson
Kristoff Svensson
HPHerbert Pöllmann
Herbert Pöllmann
RSRozineide Aparecida Antunes Boca Santa
Rozineide Aparecida Antunes Boca Santa
JSJosé Antônio da Silva Souza
José Antônio da Silva Souza

10 November 2020 in Construction and Building Materials
Verified
Journal Article
Closed access
KSKristoff Svensson
Kristoff Svensson
ANAndreas Neumann
Andreas Neumann
FMF. Feitosa Menezes
F. Feitosa Menezes
CLC. Lempp
C. Lempp
HPH. Pöllmann
H. Pöllmann

6 September 2023 in Safety of Nuclear Waste Disposal
Verified
Journal Article
Open access
LFLarissa Friedenberg
Larissa Friedenberg
JBJeroen Bartol
Jeroen Bartol
JBJames Bean
James Bean
SBSteffen Beese
Steffen Beese
HBHendrik Bollmann
Hendrik Bollmann
KZKornelia Zemke
Kornelia Zemke
For the underground disposal of high-level nuclear waste in rock salt formations, the safety concept includes the backfilling of open cavities with crushed salt. For the prognosis of the sealing function of the backfill for the safe containment of the radioactive waste, it is crucial to have a comprehensive process understanding of the crushed-salt compaction behavior. The crushed-salt compaction process is influenced by internal properties (e.g., grain size, mineralogy, and moisture content) and boundary conditions (e.g., temperature, stress state, and compaction rate) and, therefore, involves several coupled thermal–hydro–mechanical (THM) processes (Hansen et al., 2014; Kröhn et al., 2017). With the paradigm shift from the limited release of radionuclides to safe containment due to the German Repository Site Selection Act passed in 2017, the importance of crushed salt as geotechnical barrier has increased, with a focus on the evolution of its hydraulic properties. Based on the knowledge gaps in the current process understanding, the “Compaction of crushed salt for safe containment” (KOMPASS) projects were initiated to improve the scientific basis behind using crushed salt for the long-term isolation of high-level nuclear waste within rock salt repositories. The efforts to improve the prediction of crushed-salt compaction begun during the first phase of the KOMPASS projects (Czaikowski et al., 2020) and were followed up in a second phase ending in June 2023. The primary achievements of the projects are as follows (Czaikowski et al., 2020; Friedenberg et al., 2022): specification of the KOMPASS reference material, an easily available and reproducible synthetic crushed-salt material, for generic investigations; development of pre-compaction methods and successful production of samples in the short term and under in situ loading conditions; formulation of an extended laboratory program addressing the isolated investigation of known relevant factors influencing the compaction behavior of crushed salt (Düsterloh et al., 2022); execution of long-term compaction tests addressing isotropic and deviatoric load changes, temperature, and compaction state; construction of a backfill body using the KOMPASS reference material in the Sondershausen mine through collaboration with the SAVER (Entwicklung eines salzgrusbasierten Versatzkonzepts unter der Option Rückholbarkeit) project (Schaarschmidt and Friedenberg, 2022); advancement of the tools for microstructure investigation methods (Svensson and Laurich, 2022); generation (first stages) of a microphysical process list combining literature research with our own findings; benchmarking of long-term compaction test for model development and optimization of various existing models as well as the development of new models; application of a virtual demonstrator (2D model representing a backfilled drift in rock salt) for the visualization of developments and the quantification of the models (Rabbel, 2022). In summary, the KOMPASS projects contributed to the reduction of uncertainties and the strengthening of the safety case for using crushed salt within rock salt repositories.