Wang Xiaoqing

Wang Xiaoqing

Auto-generated profile, based on publicly available information

Wang Xiaoqing

Department of Architecture and Engineering, Wuhan City Polytechnic, Wuhan 430064, People’s Republic of China

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2025 in Materials Research Express
Verified
Journal Article
Open access
XWXiaoqing Wang
Xiaoqing Wang
SZShanjun Zhang
Shanjun Zhang
WLWeiwei Lu
Weiwei Lu
SYShaoyun Yin
Shaoyun Yin
CFChen Fu
Chen Fu
XWXiong wei
Xiong wei
This study investigates the synergistic effects of highly active silica fume (SF) and short-cut basalt fibers BF on the mechanical and durability performance of recycled concrete subjected to freeze–thaw cycles. Recycled concrete mixtures were prepared with varying SF contents (0, 5%, 10%, and 15%) and basalt fiber dosages (0, 0.5%, 1.0%, and 1.5%). Compressive and flexural strength tests, together with durability evaluations after 50, 100, and 150 freeze–thaw cycles, were conducted to assess performance evolution. In addition, a response surface methodology (RSM)-based multivariate regression model was developed for performance prediction. The results indicated that appropriate incorporation of SF and BF significantly refined the interfacial transition zone, improved matrix densification, and enhanced crack resistance, thereby increasing compressive and flexural strength and optimizing failure modes. Specifically, at 10% SF and 1.0% basalt fiber, compressive and flexural strengths reached maximum values of 53.7 MPa and 6.09 MPa, respectively. Freeze–thaw tests further revealed that this combination achieved the best strength retention and structural integrity after 150 cycles. The RSM model exhibited high fitting accuracy and predictive reliability, with the optimal mix predicted at 10.51% SF and 0.96% basalt fiber, which closely matched the experimental results. Overall, the synergistic incorporation of SF and BF markedly enhanced the mechanical and frost resistance properties of recycled concrete, while promoting the sustainable utilization of industrial by-products and contributing to low-carbon construction practices.

1 October 2024 in Materials Research Express
Verified
Journal Article
Open access
XWXiong wei
Xiong wei
ZSZhang Shanjun
Zhang Shanjun
YJYi Junjie
Yi Junjie
WXWang Xiaoqing
Wang Xiaoqing
To advance the use of industrial solid waste and recycled concrete, this study explores the impact of fly ash and slag powder on the mechanical properties, freeze–thaw resistance, and carbonation resistance of manufactured sand recycled aggregate concrete (MRAC). Different FSMRAC (Fly Ash and Slag Powder MRAC) mixtures were prepared by varying the amounts of fly ash and slag powder. The results show that fly ash and slag powder enhance the splitting tensile strength of MRAC more than its compressive strength. when the contents of fly ash and slag powder are 0% and 30%, respectively, the FSMRAC attains maximum compressive strength of 48.6 MPa and splitting tensile strength of 3.8 MPa, representing increases of 2.96% and 5.6% in compressive and splitting tensile strengths, respectively, compared to MRAC. A total addition of 30% fly ash and slag powder effectively reduces the loss of mechanical properties under freeze–thaw conditions. When the fly ash-to-slag powder ratio (F:S) exceeds 1.5, it improves carbonation resistance and compressive strength; when the ratio is below 1.5, it enhances splitting tensile strength resistance to freeze–thaw cycles. Slag powder promotes hydration and improves mechanical properties, while fly ash densifies the concrete matrix and lowers the carbonation rate. Response Surface Methodology (RSM) analysis indicates that both materials improve MRAC’s properties. Higher fly ash content benefits compressive strength and carbonation resistance, while higher slag powder content improves splitting tensile strength.