Xiong wei

Mr. Xiong wei

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 September 2022 in Polymers
Verified
Journal Article
Open access
PDF file
YTYan Tan
Yan Tan
JLJunyu Long
Junyu Long
XWXiong wei
Xiong wei
XCXingxiang Chen
Xingxiang Chen
BZBen Zhao
Ben Zhao
In order to study the effect of polypropylene fibers on the frost resistance of natural sand and machine-made sand concrete, polypropylene fibers (PPF) of different volumes and lengths were mixed into natural sand and machine-made sand concrete, respectively. The freeze–thaw cycle test was carried out on polypropylene-fiber-impregnated natural sand concrete (PFNSC) and polypropylene-fiber-impregnated manufactured sand concrete (PFMSC), respectively, and the apparent structural changes before and after freezing and thawing were observed. Its strength damage was analyzed. A freeze–thaw damage model and a response surface model (RSM) were established used to analyze the antifreeze performance of PFMSC, and the effects of the fiber content, fiber length, and freeze–thaw times on the antifreeze performance of PFMSC were studied. The results show that with the increase in the number of freeze–thaw cycles, the apparent structures of the PFMSC gradually deteriorated, the strength decreased, and the degree of freeze–thaw damage increased. According to the strength damage model, the optimum volume of PPF for the PFNSC specimens is 1.2%, and the optimum volume of PPF for the PFMSC specimens is 1.0%. According to the prediction of RSM, PFNSC can maintain good antifreeze performance within 105 freeze–thaw cycles, and when the PPF length is 11.8 mm, the antifreeze performance of PFNSC reaches the maximum, its maximum compressive strength value is 33.8 MPa, and the split tensile strength value is 3.1 MPa; PFMSC can maintain a good antifreeze performance within 96 freeze–thaw cycles. When the length of PPF is 9.1 mm, the antifreeze performance of PFMSC reaches the maximum, its maximum compressive strength value is 45.8 MPa, and its split tensile strength value is 3.2 MPa. The predicted values are in good agreement with the measured values, and the model has high reliability.

14 May 2024 in International Journal of Concrete Structures and Materials
Verified
Journal Article
Open access
PDF file
XWXiong wei
Xiong wei
WXWang Xiaoqing
Wang Xiaoqing
LCLi Chunmei
Li Chunmei
In order to promote the engineering application of recycled concrete, the effects of PPF and nano-TiO2 dioxide on the mechanical properties and durability of recycled concrete were studied.Polypropylene fiber recycled concrete(PRAC) and nano-TiO2 recycled concrete(TRAC) were prepared by adding different volume contents of PPF and nano-TiO2. The experimental findings demonstrated that the PPF and nano-TiO2 improved the splitting tensile strength of RAC better than the compressive strength. When the volume content of nano-TiO2. and PPF is 0.8% and 1.0%, respectively, the corresponding splitting tensile strength of concrete reaches the maximum value(3.4 and 3.7 MPa). The contribution rates of nano-TiO2 and PPF with different volume contents to the mechanical properties of RAC have optimal values, which are 0.4 and 1.0%, respectively. The incorporation of nano-TiO2 and PPF can effectively inhibit the loss of RAC mass and the generation of pores under freeze–thaw conditions, and slow down the decrease of dynamic elastic modulus. When the volume content of PPF is 1.0% and the volume content of nano-TiO2 is 0.4%, the protection effect on the internal structure of RAC is better, and its carbon resistance is better. The results of RSM model analysis and prediction show that both PPF and nano-TiO2 can be used as admixture materials to improve the mechanical properties and durability of RAC, and the comprehensive improvement effect of PPF on RAC performance is better than that of nano-TiO2.

29 April 2023 in Polymers
Verified
Journal Article
Open access
PDF file
YTYan Tan
Yan Tan
CMChong Ma
Chong Ma
BZBen Zhao
Ben Zhao
XWXiong wei
Xiong wei
XCXingxiang Chen
Xingxiang Chen
JYJiangtao Yu
Jiangtao Yu
To popularize the complete replacement of natural sand with manufactured sand, a study was performed to determine the effect of adding polypropylene fibres (PPFs) to increase the bending strength and carbonization resistance of manufactured sand concrete (MSC). A 2 × 3 factorial design with the content and length of PPF as variables was used to establish a carbonization depth prediction model and a response surface model (RSM). The phase composition and microstructure of polypropylene-fibre-reinforced manufactured sand concrete (PPF-MSC) were analysed using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show the addition of PPF with different contents and lengths increases the bending strength of PPF-MSC to varying degrees, while reducing the carbonization depth and increasing the dynamic elastic modulus after 28 days of carbonization. The highest bending strength (6.12 MPa) and carbonization resistance of PPF-MSC are obtained by the addition of 1 kg/m3 of 12 mm PPF, while the carbonization depth and an increase in the dynamic elastic modulus after 28 days of carbonization are maintained at a minimum of 2.26% and 1.94 mm, respectively. A prediction model was established to obtain a formula for the PPF-MSC carbonization depth in terms of the content and length of PPF and the carbonization time. The following results were obtained from the RSM: compared to the PPF length, the PPF content has a larger impact on the PPF-MSC bending strength and a smaller impact on the PPF-MSC carbonization resistance; there is no significant interaction between the content and length of PPF; and the predicted and measured values are close, indicating that the model is highly reliable. A comparison of the XRD patterns and SEM micrographs of PPF-MSC and MSC after 28 days of carbonization show a lower peak intensity of CaCO3 in the pattern for the carbonized area for PPF-MSC than for MSC and considerably fewer surface pores and cracks in PPF-MSC than in MSC. These results indicate that the addition of PPF increases the compactness of MSC and creates an effective resistance to the erosion by water molecules and carbon dioxide (CO2), thus enhancing the bending strength and carbonization resistance of MSC.

1 December 2025 in Materials Research Express
Verified
Journal Article
Open access
XWXiaoqing Wang
Xiaoqing Wang
SZShanjun Zhang
Shanjun Zhang
WLWeiwei Lu
Weiwei Lu
SYShaoyun Yin
Shaoyun Yin
CFChen Fu
Chen Fu
XWXiong wei
Xiong wei
This study investigates the synergistic effects of highly active silica fume (SF) and short-cut basalt fibers BF on the mechanical and durability performance of recycled concrete subjected to freeze–thaw cycles. Recycled concrete mixtures were prepared with varying SF contents (0, 5%, 10%, and 15%) and basalt fiber dosages (0, 0.5%, 1.0%, and 1.5%). Compressive and flexural strength tests, together with durability evaluations after 50, 100, and 150 freeze–thaw cycles, were conducted to assess performance evolution. In addition, a response surface methodology (RSM)-based multivariate regression model was developed for performance prediction. The results indicated that appropriate incorporation of SF and BF significantly refined the interfacial transition zone, improved matrix densification, and enhanced crack resistance, thereby increasing compressive and flexural strength and optimizing failure modes. Specifically, at 10% SF and 1.0% basalt fiber, compressive and flexural strengths reached maximum values of 53.7 MPa and 6.09 MPa, respectively. Freeze–thaw tests further revealed that this combination achieved the best strength retention and structural integrity after 150 cycles. The RSM model exhibited high fitting accuracy and predictive reliability, with the optimal mix predicted at 10.51% SF and 0.96% basalt fiber, which closely matched the experimental results. Overall, the synergistic incorporation of SF and BF markedly enhanced the mechanical and frost resistance properties of recycled concrete, while promoting the sustainable utilization of industrial by-products and contributing to low-carbon construction practices.

1 October 2024 in Materials Research Express
Verified
Journal Article
Open access
XWXiong wei
Xiong wei
ZSZhang Shanjun
Zhang Shanjun
YJYi Junjie
Yi Junjie
WXWang Xiaoqing
Wang Xiaoqing
To advance the use of industrial solid waste and recycled concrete, this study explores the impact of fly ash and slag powder on the mechanical properties, freeze–thaw resistance, and carbonation resistance of manufactured sand recycled aggregate concrete (MRAC). Different FSMRAC (Fly Ash and Slag Powder MRAC) mixtures were prepared by varying the amounts of fly ash and slag powder. The results show that fly ash and slag powder enhance the splitting tensile strength of MRAC more than its compressive strength. when the contents of fly ash and slag powder are 0% and 30%, respectively, the FSMRAC attains maximum compressive strength of 48.6 MPa and splitting tensile strength of 3.8 MPa, representing increases of 2.96% and 5.6% in compressive and splitting tensile strengths, respectively, compared to MRAC. A total addition of 30% fly ash and slag powder effectively reduces the loss of mechanical properties under freeze–thaw conditions. When the fly ash-to-slag powder ratio (F:S) exceeds 1.5, it improves carbonation resistance and compressive strength; when the ratio is below 1.5, it enhances splitting tensile strength resistance to freeze–thaw cycles. Slag powder promotes hydration and improves mechanical properties, while fly ash densifies the concrete matrix and lowers the carbonation rate. Response Surface Methodology (RSM) analysis indicates that both materials improve MRAC’s properties. Higher fly ash content benefits compressive strength and carbonation resistance, while higher slag powder content improves splitting tensile strength.