10 November 2025 in INGENIERÍA Y COMPETITIVIDAD
Objectives: The main objective of this study was to promote the formation of White and Brown Etching Layers (WEL and BEL) on R260 pearlitic steel by means of a controlled laboratory grinding process, in order to analyze the microstructural and mechanical changes from the surface to the base material.Materials and methods: R260 pearlitic steel used for railway rail manufacturing was investigated. The transformed surface layers were generated through a controlled grinding process. Microstructural characterization was performed using light optical microscopy (LOM) and scanning electron microscopy (SEM). Mechanical characterization was carried out by microhardness testing and nanoindentation from the ground surface toward the bulk material. Subsequently, the WEL region was analyzed by transmission electron microscopy (TEM) to identify microstructural changes in the different zones affected by the grinding process.Results: The results showed that WEL and BEL can be distinguished not only by their morphological features observed by LOM and SEM, but also by their mechanical properties. Both layers exhibited significantly higher hardness and Young’s modulus values than the pearlitic base material.Conclusions: The microstructural transformations induced by the grinding process were visually identified as WEL and BEL through contrast and texture variations observed by LOM and SEM. These layers extended from the ground surface to depths of approximately 30 µm and exhibited distinct mechanical responses associated with intrinsic microstructural changes generated by the grinding process.