The present numerical study aims to investigate the geometry of an arrangement of isothermal rectangular fins, mounted in alternating form in the lower and upper surfaces of microchannels, subjected to laminar, incompressible, and forced convective flows in a two-dimensional domain. The main purpose is maximizing the efficiency and the heat transfer rate among the fins and the fresh flow in the channel, and minimizing the pressure drop in the finned channel. It is investigated here one degree of freedom (L1/L) that represents the distance between the first and second fins of the arrangement. The remaining degrees of freedom are kept constant (L2/L and L3/L). All numerical simulations were performed considering air as a working fluid for Reynolds and Prandtl numbers of ReH = 100 and Pr = 0.71. The best thermal performance of the arrangement was achieved for the extreme ratios of L1/L, i.e., when the second fin was mounted near the first or third fins. A small advantage is noticed for the lowest magnitude of L1/L in comparison with the other extreme position. The difference between the best and worst thermal performance, measured by the heat transfer rate, was nearly 23%. For the pressure drop, an intermediate ratio L1/L = 0.4 was conducted to get the best fluid dynamic performance.
8 April 2026 in Revista Mundi Engenharia, Tecnologia e Gestão (ISSN: 2525-4782)
O presente estudo numérico tem como objetivo determinar a disposição ótima de aletas inseridas de forma alternada em microcanais, a fim de conduzir a máxima taxa de transferência de calor e a mínima perda de carga no canal. O escoamento no canal é de ar em menor temperatura, laminar, incompressível e em regime permanente, com transferência de calor por convecção forçada. O método design construtal é usado para o desenvolvimento das alternativas de projeto e o método TOPSIS é utilizado para avaliar os resultados de forma multiobjetiva, a partir de um indicador de performance multiobjetivo (Ci), baseado em uma ponderação de pesos para variável térmica e fluidodinâmica. No presente estudo são investigadas as razões entre as distâncias das aletas 1 e 2 e o comprimento da área de ocupação (L1/L e L2/L), enquanto as aletas 0 e 3 são mantidas fixas (L0/L = 0,125 e L3/L = 0,875). Todas as simulações numéricas foram conduzidas considerando um escoamento de ar com números de Reynolds e Prandtl constantes, ReH = 100 e Pr = 0,71, respectivamente. Os resultados indicaram que, ao atribuir um peso de 50% para cada indicador de desempenho, a geometria que apresenta os maiores valores de Ci possui configuração assimétrica com distância entre aletas não uniforme.