Tianyu Yang

Tianyu Yang

Auto-generated profile, based on publicly available information

Tianyu Yang

Querrey Simpson Institute for Bioelectronics, Northwestern University, Evanston, IL 60208, USA

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Open access
BKBeomjin Kwon
Beomjin Kwon
TFThomas Foulkes
Thomas Foulkes
TYTianyu Yang
Tianyu Yang
NMNenad Miljkovic
Nenad Miljkovic
WKWilliam P. King
William P. King
This paper reports the design, fabrication, and demonstration of additively manufactured air jet impingement coolers for thermal management of high-power gallium nitride (GaN) transistors. The polymer jet coolers impinge high-speed air flow with a velocity of 42 to 195 m/s (Reynolds number between 1.87 × 104 and 8.77 × 104) onto working GaN devices mounted on a printed circuit board. The air jet provides cooling heat fluxes up to 58.4 W/cm2, cooling rates up to 6.6° C/s, and convective heat transfer coefficient ranging from 5.2 to 17.0 kW/(m2.K). The cooling performance is comparable to that of jet coolers made from other materials and manufacturing technologies. A key benefit of additive manufacturing is design freedom and geometric complexity, which we highlight by demonstrating three different packaging configurations, each enabled by a different jet cooler design that is customized for different types of packaging configurations: cooler 1 directs two parallel impinging jets onto the top side of two devices; cooler 2 directs two air jets onto the front side and two air jets onto the back side of two devices; and cooler 3 directs air jets onto the front side of four devices mounted on parallel adjacent circuit boards. A second benefit of additive manufacturing is the ability to consolidate multiple components into a single part, which we highlight by combining a nozzle, fluidic delivery system, and flow distributor within a volume of 80 × 80 × 100 mm3. This work demonstrates the potential of additive manufacturing to create complex, lightweight fluidic delivery systems to achieve thermally and hydrodynamically optimized air jet cooling for high power density systems.

1 May 2021 in International Journal of Heat and Mass Transfer
Verified
Journal Article
Closed access
TYTianyu Yang
Tianyu Yang
PBPaul V. Braun
Paul V. Braun
NMNenad Miljkovic
Nenad Miljkovic
WKWilliam P. King
William P. King

18 February 2020 in Applied Physics Letters
Verified
Journal Article
Closed access
PDF file
TYTianyu Yang
Tianyu Yang
JKJin Gu Kang
Jin Gu Kang
PWPatricia Weisensee
Patricia Weisensee
BKBeomjin Kwon
Beomjin Kwon
PBPaul V. Braun
Paul V. Braun
WKWilliam P. King
William P. King
Composite phase change materials consisting of a high-latent-heat phase change material (PCM) embedded in a high-thermal-conductivity matrix are desirable for thermally buffering pulsed heat loads via rapid absorption and release of thermal energy at a constant temperature. This paper reports a composite PCM thermal buffer consisting of a Field's metal PCM having high volumetric latent heat (315 MJ/m3) embedded in a copper (Cu) matrix having high intrinsic thermal conductivity [384 W/(m·K)]. We demonstrate thermal buffer samples fabricated with Cu volume fractions from 0.05 to 0.2 and sample thicknesses ranging between 1 mm and 4 mm. Experiments coupled with finite element method simulations were used to determine the figures of merit (FOMs), cooling capacity ηeff, energy density Eeff, effective thermal conductivity keff, and the buffering time constant τ. The cooling capacity was measured to be as high as ηeff = 72 ± 4 kJ/(m2·K1/2·s1/2) for the 1.45 mm thick thermal buffer sample having a Cu volume fraction of 0.13, significantly higher than theoretical values for aluminum–paraffin composites [45 kJ/(m2·K1/2·s1/2)] or pure paraffin wax [8 kJ/(m2·K1/2·s1/2)]. Our work develops design guidelines for high-FOM thermal buffer devices for pulsed heat load thermal management.

19 July 2019 in IEEE Transactions on Components, Packaging and Manufacturing Technology
Verified
Journal Article
Closed access
TYTianyu Yang
Tianyu Yang
TFThomas Foulkes
Thomas Foulkes
BKBeomjin Kwon
Beomjin Kwon
JKJin Gu Kang
Jin Gu Kang
PBPaul V. Braun
Paul V. Braun
NMNenad Miljkovic
Nenad Miljkovic
Heat dissipation is a key obstacle to achieving reliable, high-power-density electronic systems. Thermal devices capable of actively managing heat transfer are desired to enable heat dissipation optimization and enhanced reliability through device isothermalization. Here, we develop a millimeter-scale liquid metal droplet thermal switch capable of controlling heat transfer spatially and temporally. We demonstrate the thermal switch by integrating it with gallium nitride (GaN) devices mounted on a printed circuit board (PCB) and measure heat transfer and temperature of each device for a variety of switch positions and heat dissipation levels. When integrated with a single GaN device (2.6 mm × 4.6 mm face area) dissipating 1.8 W, the thermal switch shows the ability to actively control heat transfer by conducting 1.3 W in the ON mode with the GaN device at 51 °C ± 1 °C, and 0.5 Win the OFF mode with the GaN device at 95 °C ± 1 °C. To elucidate the heat transfer physics, we developed a 1-D system thermal resistance model in conjunction with an independent 3-D finite-element method (FEM) simulation, showing excellent agreement with our experimental data. Finally, we demonstrated that when the switch is integrated with two GaN devices, the switch can balance the device heat transfer rate and enhance junction temperature uniformity and system reliability by lowering the device-to-device temperature difference from >10 °C (no switch) to 0 °C.

22 January 2021 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
XYXuan Yi
Xuan Yi
TYTianyu Yang
Tianyu Yang
JXJianqiao Xiao
Jianqiao Xiao
NMNenad Miljkovic
Nenad Miljkovic
WKWilliam P. King
William P. King
KHKiruba S. Haran
Kiruba S. Haran
Litz wire has been widely used in high-frequency electrical machines and transformers to minimize induced current loss and maintain high efficiency. Its heat dissipation capability can be a key design factor for high-power-density, high-frequency electrical machines. Although litz wire equivalent thermal conductivity has been studied, its transposition arrangement on heat dissipation enhancement is usually neglected. This article focuses on developing an analytical model to predict litz wire equivalent thermal conductivity including transposition effects. 3-D finite element models and hardware experiments are used to validate the proposed analytical model. Fast and accurate litz wire thermal conductivity prediction values can be obtained. The transposed and parallel arrangement effects on litz wire equivalent thermal conductivity are compared and discussed. This study shows that the transposition arrangement could improve litz wire heat dissipation capability by 10% to 30%, demonstrating that electrical machine power density can be potentially increased by up to 14%. The proposed method can advance winding design to push the boundaries of electrical machine power density.

15 May 2026 in Science Advances
Verified
Journal Article
Open access
SKSun Hong Kim
Sun Hong Kim
TPTae Wan Park
Tae Wan Park
SCSeunghee Cho
Seunghee Cho
TYTianyu Yang
Tianyu Yang
SYSeonggwang Yoo
Seonggwang Yoo
JRJohn A. Rogers
John A. Rogers
Accurate, continuous monitoring of psychophysiological states is central to understanding stress and autonomic dysfunction across diverse medical contexts. Current approaches such as polygraphy and polysomnography rely on cumbersome, wired sensors that limit real-world utility and burden patients, particularly vulnerable populations such as infants. Here, we introduce a wireless, skin-interfaced multimodal sensing system capable of simultaneously recording cardiac, respiratory, electrodermal, and thermal signals in a time-synchronized manner. Leveraging compact and soft designs, the technology enables unobtrusive monitoring across controlled, clinical, and naturalistic settings. Validation studies performed in parallel with gold standard systems demonstrate high fidelity in quantifying stress responses during polygraph interviews, cognitive load tasks, and cold pressor tests. In pediatric sleep studies, the data reliably identify arousals, hypopnea, and apnea while revealing disease-specific autonomic signatures in infants with Down syndrome. Real-world deployment during emergency simulation training shows that multimodal stress signatures correlate inversely with performance, underscoring translational value in medical education. Machine learning analyses across all studies confirm that multimodal features outperform single-signal approaches in detecting stress and clinical events with high sensitivity and specificity. Collectively, these findings establish the technology as a next-generation wearable platform that bridges engineering innovation and clinical practice, offering mechanistic insight and diagnostic potential in stress medicine, sleep medicine, and beyond.