Abdullah Istek

Abdullah Istek

Auto-generated profile, based on publicly available information

Abdullah Istek

Forest Industrial Engineering, Faculty of Forestry Bartin University Bartin Turkey

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 August 2023 in Coatings
Verified
Journal Article
Open access
PDF file
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
IÖİsmail Özlüsoylu
İsmail Özlüsoylu
AIAbdullah İstek
Abdullah İstek
Ahmet CanAhmet Can
Ahmet Can
Nowadays, the particleboard industry cannot meet the market’s demand. Therefore, filler materials have started to be used both to conserve raw materials and to enable the use of wood-based boards in different areas. This study investigates the effects of incorporating different ratios of activated carbon (0%, 1.5%, 4.5%, 7.5%) on the properties of particleboards. The physical properties were examined, including density, moisture content, thickness swelling, and water absorption. The results reveal that the density increased with increasing activated carbon content while the moisture content decreased, indicating improved dimensional stability and water resistance. Additionally, the color properties were influenced by activated carbon, leading to a darker appearance with decreased lightness and yellow-blue components. The mechanical properties, such as internal bond strength, modulus of rupture, and modulus of elasticity, showed significant enhancements with the addition of activated carbon, indicating improved bonding and increased strength. Moreover, the thermal conductivity decreased with increasing activated carbon content and improved insulation performance. Scanning electron microscope analysis confirmed the uniform distribution of activated carbon within the particleboard matrix, without agglomeration, positively impacting the mechanical performance. According to the thermogravimetric analysis results, the addition of activated carbon led to a decrease of up to 6.15% in mass loss compared to the control group. The incorporation of activated carbon at a ratio of 4.5% in particleboards confers notable enhancement to their physical, mechanical, and thermal characteristics. These findings contribute to understanding the potential benefits and considerations of using activated carbon as an additive in particleboard production.

1 January 2013 in TURKISH JOURNAL OF AGRICULTURE AND FORESTRY
Verified
Journal Article
Closed access
AIAbdullah İstek
Abdullah İstek
Deniz AydemirDeniz Aydemir
Deniz Aydemir
HEHüdaverdi Eroğlu
Hüdaverdi Eroğlu

27 September 2019 in Drvna industrija
Verified
Journal Article
Closed access
PDF file
AIAbdullah Istek
Abdullah Istek
IOIsmail Ozlusoylu
Ismail Ozlusoylu
In this study, the effect of mat moisture content on the physical and mechanical properties of particleboard was investigated. The experimental boards were produced by using 40 % softwood, 45 % hardwood chips, and 15 % sawdust. The...

2 October 2020 in TURKISH JOURNAL OF AGRICULTURE AND FORESTRY
Verified
Journal Article
Closed access
AIAbdullah İsTek
Abdullah İsTek
ABAziz Bi̇çEr
Aziz Bi̇çEr
IÖİsMail Özlüsoylu
İsMail Özlüsoylu

30 November 2022 in BioResources
Verified
Journal Article
Closed access
IÖİsMail Özlüsoylu
İsMail Özlüsoylu
AIAbdullah İsTek
Abdullah İsTek
Medium density fiberboard (MDF) is widely utilized in furniture production. Most MDF in such applications has a surface laminate layer. The lamination process improves the physical and mechanical properties of the boards. The temperature, press time, and pressure values applied during the lamination process affect such properties. In this work, the lamination process was carried out using a constant temperature (180 °C), four different press times (18, 20, 22, and 24 s), and three different pressures (25, 30, and 35 kg/cm2). The raw weight of the decor paper was 90 g/m2 and UF and MF glues were used in its production. The properties of the laminated panels were then determined for each variation. In general, the water absorption and thickness swelling properties were improved at the lower pressure and higher press times. The internal bonding strength exhibited a linear change at different press times depending on increasing pressure values, whereas the changes in the bending strength and modulus of elasticity in bending were not statistically significant. It was concluded that the BS increased with rising pressure in the short-term lamination process and that the effect of the pressure on the BS declined with increasing press time.

19 February 2024 in Wood Material Science & Engineering
Verified
Journal Article
Closed access
MEMehmet Emin ERGÜN
Mehmet Emin ERGÜN
AIAbdullah İstek
Abdullah İstek
IÖİsmail Özlüsoylu
İsmail Özlüsoylu
FKFiliz Koyuncu
Filiz Koyuncu
ŞBŞaban Bülbül
Şaban Bülbül