23 September 2019 in Nature Biomedical Engineering
13 February 2017 in Nature Nanotechnology
5 September 2014 in Nature Communications
9 July 2020 in IEEE Journal of Solid-State Circuits
CMOS microelectrode arrays (MEAs) can record electrophysiological activities of a large number of neurons in parallel but only extracellularly with a low signal-to-noise ratio. Patch-clamp electrodes can perform intracellular recording with a high signal-to-noise ratio but only from a few neurons in parallel. Recently, we have developed and reported a neuroelectronic interface that combines the parallelism of the CMOS MEA and the intracellular sensitivity of the patch clamp. Here, we report the design and characterization of the CMOS integrated circuit (IC), a critical component of the neuroelectronic interface. Fabricated in 0.18-μm technology, the IC features an array of 4096 platinum black (PtB) nanoelectrodes spaced at a 20-μm pitch on its surface and contains 4096 active pixel circuits. Each active pixel circuit, consisting of a new switched capacitor current injector--capable of injecting from ±15 pA to ±0.7 μA with a 5-pA resolution--and an operational amplifier, is highly configurable. When configured into the current-clamp mode, the pixel intracellularly records membrane potentials, including subthreshold activities with ~23-μV rms input-referred noise while injecting a current for simultaneous stimulation. When configured into the voltage-clamp mode, the pixel becomes a switched-capacitor transimpedance amplifier with ~1-pA rms input-referred noise and intracellularly records ion channel currents while applying a voltage for simultaneous stimulation. Such voltage-/current-clamp intracellular recording/stimulation is a feat only previously possible with the patch-clamp method. At the same time, as an array, the IC overcomes the lack of parallelism of the patch-clamp method, measuring thousands of mammalian neurons in parallel, with full-frame intracellular recording/stimulation at 9.4 kHz.
29 July 2022 in Science Advances
PH controls a large repertoire of chemical and biochemical processes in water. Densely arrayed pH microenvironments would parallelize these processes, enabling their high-throughput studies and applications. However, pH localization, let alone its arrayed realization, remains challenging because of fast diffusion of protons in water. Here, we demonstrate arrayed localizations of picoliter-scale aqueous acids, using a 256-electrochemical cell array defined on and operated by a complementary metal oxide semiconductor (CMOS)–integrated circuit. Each cell, comprising a concentric pair of cathode and anode with their current injections controlled with a sub-nanoampere resolution by the CMOS electronics, creates a local pH environment, or a pH “voxel,” via confined electrochemistry. The system also monitors the spatiotemporal pH profile across the array in real time for precision pH control. We highlight the utility of this CMOS pH localizer-imager for high-throughput tasks by parallelizing pH-gated molecular state encoding and pH-regulated enzymatic DNA elongation at any selected set of cells.
10 March 2022 in Lab on a Chip
Electrode-based impedance and electrochemical measurements can provide cell-biology information that is difficult to obtain using optical-microscopy techniques. Such electrical methods are non-invasive, label-free, and continuous, eliminating the need for fluorescence reporters and overcoming optical imaging's throughput/temporal resolution limitations. Nonetheless, electrode-based techniques have not been heavily employed because devices typically contain few electrodes per well, resulting in noisy aggregate readouts. Complementary metal-oxide-semiconductor (CMOS) microelectrode arrays (MEAs) have sometimes been used for electrophysiological measurements with thousands of electrodes per well at sub-cellular pitches, but only basic impedance mappings of cell attachment have been performed outside of electrophysiology. Here, we report on new field-based impedance mapping and electrochemical mapping/patterning techniques to expand CMOS-MEA cell-biology applications. The methods enable accurate measurement of cell attachment, growth/wound healing, cell–cell adhesion, metabolic state, and redox properties with single-cell spatial resolution (20 μm electrode pitch). These measurements allow the quantification of adhesion and metabolic differences of cells expressing oncogenes versus wild-type controls. The multi-parametric, cell-population statistics captured by the chip-scale integrated device opens up new avenues for fully electronic high-throughput live-cell assays for phenotypic screening and drug discovery applications.