12 February 2020 in The International Journal of Advanced Manufacturing Technology
22 December 2018 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
At present, the status of the monitoring of computerized numerical control machine tools is still in the initial stage, and there is no uniform standard for fault early warning and diagnosis of machine tools. A standardized and comprehensive machine tool condition monitoring method based on energy fault tree analysis is proposed. The power, current and temperature inside the numerical control system and the signal of the external vibration sensor are collectively referred to as energy. A new energy fault tree is used to identify the location of the fault. At the same time, the client of computerized numerical control system internal information collection and analysis is developed. The characteristic frequency of each key component is analysed by theoretical mechanics, and an overall monitoring method is proposed to improve the monitoring efficiency. Finally, the reliability of the monitoring method is verified by experiments. The surface roughness of the parts is reduced by approximately 50%, which lays the foundation for the application of the engineering.
17 November 2020 in Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
A fault diagnosis method of flexible production line machining center based on principal component analysis (PCA) and artificial bee colony based learning vector quantization (ABC-LVQ) neural network is proposed to target the issue of key vulnerable parts of the flexible production line machining center. Along with that, a general scheme of fault diagnosis is designed according to the characteristics of flexible production line which includes multiple machining centers. Firstly, the acceleration sensor is used to collect the vibration signals of the key and critical components of the flexible production line machining center, to analyze and pick up the multi-information characteristics, the time domain, the frequency domain and the time-frequency domain of the signals. Then, in order to reduce the dimension of the eigenvector, PCA is adopted to realize such reduction. Finally, aiming at the problem that LVQ neural network is sensitive to the initial value weights, an ABC algorithm is proposed to quickly obtain excellent initial weights vector of LVQ neural network, which can accurately classify all kinds of faults. The experimental results show that the scheme can diagnose and monitor several key components of horizontal machining center of flexible production line in a quick and accurate manner.
1 November 2020 in Journal of Physics: Conference Series
In order to monitor the abnormal condition that the zero point of the encoder does not coincide with the actual mechanical zero position in the full-closed control loop of a rotating axis, a Siemens 840D numerical control system based on abnormal condition inspection method is proposed. According to the gathered data by the measurement system of a rotating axis servo motor, the logical comparison program in PLC (Programmable Logic Controller) is developed to monitor the zero point of rotating axis by using Siemens 840D numerical control system and STEP7 software platform. The verification experiment results show that the proposed method can quickly identify the abnormal displacement of the zero point for a rotating axis and disable the servo motor in time, which can effectively avoid the poor quality problem caused by the abnormal condition in rotating axis.