A single-photon avalanche diode (SPAD), when biased at above its breakdown voltage, can be triggered by a photon that results in a self-sustaining avalanche multiplication process.
1 Its gain is so large that its output current can be easily converted into a digital signal without using complex front-end amplifiers deteriorating the signal-to-noise (SNR) ratio.
2 With such single-photon sensitivity, SPADs are suitable for photon-starved applications such as single molecule detection.
3, 4 Thanks to the progress of semiconductor technology, SPAD arrays have been fabricated in a low-cost complementary metal-oxide-semiconductor (CMOS) process for three dimensional ranging and fluorescence lifetime sensing applications.
5, 6, 7, 8 The doubt about higher dark count caused by exacerbated tunneling effect on an advanced CMOS process has been dispelled by the latest developments in deep sub-micron SPAD structures.
9, 10, 11, 12 A dark count rate (DCR) of 25 Hz has been successfully reported in standard 0.13 μm CMOS process,
10 and low dark-count prototypes moving to 90 nm CMOS process node to miniaturize the pixel size or to enhance the quantum efficiency in the near-infrared spectral range have also been recently published.
11, 12 Much larger SPAD arrays can be expected to facilitate fluorescence lifetime imaging microscopy (FLIM) applications.