For over 50 years, pure or doped silica glass optical fibres have been an unrivalled platform for the transmission of laser light and optical data at wavelengths from the visible to the near infra-red. Rayleigh scattering, arising from frozen-in density fluctuations in the glass, fundamentally limits the minimum attenuation of these fibres and hence restricts their application, especially at shorter wavelengths. Guiding light in hollow (air) core fibres offers a potential way to overcome this insurmountable attenuation limit set by the glass’s scattering, but requires reduction of all the other loss-inducing mechanisms. Here we report hollow core fibres, of nested antiresonant design, with losses comparable or lower than achievable in solid glass fibres around technologically relevant wavelengths of 660, 850, and 1060 nm. Their lower than Rayleigh scattering loss in an air-guiding structure offers the potential for advances in quantum communications, data transmission, and laser power delivery.
The fabrication of hollow core microstructured fibers is significantly more complex than solid fibers due to the necessity to control the hollow microstructure with high precision during the draw. We present the first model that can recreate tubular anti-resonant hollow core fiber draws, and accurately predict the draw parameters and geometry of the fiber. The model was validated against two different experimental fiber draws and very good agreement was found. We identify a dynamic within the draw process that can lead to a premature and irreversible contact between neighboring capillaries inside the hot zone, and describe mitigating strategies. We then use the model to explore the tolerance of the draw process to unavoidable structural variations within the preform, and to study feasibility and limiting phenomena of increasing the produced yield. We discover that the aspect ratio of the capillaries used in the preform has a direct effect on the uniformity of drawn fibers. Starting from high precision preforms the model predicts that it could be possible to draw 100 km of fiber from a single meter of preform.
23 September 2019 in Journal of Lightwave Technology
We report a Nested Antiresonant Nodeless hollow-core Fiber (NANF) operating in the first antiresonant passband. The fiber has an ultrawide operational bandwidth of 700 nm, spanning the 1240–1940 nm wavelength range that includes the O-, S-, C- and L- telecoms bands. It has a minimum loss of 6.6 dB/km at 1550 nm, a loss ≤ 7 dB/km between 1465–1655 nm and ≤ 10 dB/km between 1297–1860 nm. By splicing together two structurally matched fibers and by adding single mode fiber (SMF) pigtails at both ends we have produced a ~1 km long span. The concatenated and connectorized fiber has an insertion loss of approximately 10 dB all the way from 1300 nm to 1550 nm, and an effectively single mode behavior across the whole spectral range. To test its data transmission performance, we demonstrate 50-Gb/s OOK data transmission across the O- to L-bands without the need for optical amplification, with bit-error-rates (BERs) lower than the 7% forward error correction (FEC) limit. With the help of optical amplification, 100-Gb/s PAM4 transmission with BER lower than the KP4 FEC limit was also achieved in the O/E and C/L bands, with relatively uniform performance for all wavelengths. Our results confirm the excellent modal purity of the fabricated fiber across a broad spectral range, and highlight its potential for wideband, low nonlinearity, low latency data transmission.
Resonator fiber optic gyroscope (RFOG) performance has hitherto been limited by nonlinearity, modal impurity, and backscattering in the sensing fibers. The use of hollow-core fiber (HCF) effectively reduces nonlinearity, but the complex interplay among glass and air-guided modes in conventional HCF technologies can severely exacerbate RFOG instability. By employing high-performance nested anti-resonant nodeless fiber, we demonstrate long-term stability in a hollow-fiber RFOG of 0.05 deg/h, nearing the levels required for civil aircraft navigation. This represents a improvement over any prior hollow-core RFOG and a factor of over any prior result at integration times longer than 1 h.