11 December 2025 in Salud, Ciencia y Tecnología
Introduction: The study focused on analyzing the design of a centrifugal pump in vehicle engine cooling systems. Cavitation, a phenomenon that impacts the efficiency and durability of hydraulic components, was examined as a key variable. Based on the geometry of the centrifugal pump impeller, computational fluid dynamics (CFD) simulations and experimental validation were employed.Methods: Three combined strategies were implemented: analysis of hydraulic parameters using equations; precise modeling of flow behavior to evaluate geometric configurations; and comparison of numerical data with actual pressure and flow measurements. Fluctuations in the motor diameter (61 mm, 62 mm, and 63 mm) were analyzed under normal operating conditions and acceleration.Results: Increasing the inlet diameter to 61 mm proved to be the ideal solution, achieving a 5% increase in pump inlet pressure and significantly reducing the risk of cavitation. CFD methods were confirmed as valuable tools for refining designs, demonstrating a high correlation with experimental data.Conclusions: The effective use of tools such as CFD to address critical challenges in automotive engineering is emphasized, optimizing both technical performance and environmental impact. Furthermore, it increases hydraulic efficiency and reduces cavitation in centrifugal pump in vehicle engine cooling systems.