1 July 2014 in Physica E: Low-dimensional Systems and Nanostructures
31 January 2018 in Journal of Materials Science: Materials in Electronics
1 May 2013 in Materials Science Forum
Composite of TiO2 nanowire and Cu2O nanocube has been prepared. TiO2 nanowire with ~240nm in thickness and 20 nm in length were synthesized by using liquid phase deposition(LPD) method at 50°C for 4h on ITO substrate. The anatase phase of TiO2 nanowire was obtained by annealing the samples at 400°C for 1hin air. The Cu2O nanocubes were prepared by the reduction of Cu2+ions with ascorbic acid in the present of trisodium citrate and sodium dodecilsulfat (SDS) surfactant under an alkaline condition. The SDS addition was added with various concentrations namely 10 mM, 18 mM, and 26 mM during the Cu2O preparation for spin-coated onto TiO2 nanowire at 3000 rpm for 30s. An optical property of TiO2 Nanowire - Cu2O Nanocube has been characterized by UV-Vis spectroscopy.The original TiO2 nanowire has single absorption peak at 318 nm, but it was shifted to 321 nm as Cu2O/SDS addition. A new peak at 440 nm was as the Cu2O nanocube absorption spectra. The Cu2O nanocube addition to the TiO2 nanostructure film caused increase in the optical absorption of the system in the region 400 – 800 nm. We also studied the absorption properties of the hybrid system when Cu2O nanocube preparation under SDS condition. It was that found the increase in the SDS concentration has caused the optical absorption of the hybrid in this region decreased. This is believed due to the decrease of Cu2O nanocube size as the SDS concentration increase. This could be due to change in the TiO2 nanowire-Cu2O nanocube hybrid-structure. This cooperate may find use in photoelectrochemical application.
1 January 2013 in AIP Conference Proceedings
Hybrid ZnO nanostructure with controlled morphology have been proved to enhance the physical and chemical properties of the material and used as photodiode and sensor. In this paper, hybrid graphene-ZnO nanoflower and nanorods have been successfully synthesized via a seed mediated method with micropatterned ZnO nanoseed treated with multilayer graphene (MLG) in a hydrothermal process. In typical process, the ZnO nanoseeds with and without resists were spin coated with a multilayer graphene prior to the growth process. The treated seed was then used to grow the ZnO nanostructures in the growth solution that contained equimolar (0.04 M) of zinc nitrate hexahydrate and hexamethylenetetramine. The growth process was carried out inside an autoclave at temperature 70 °C. The growth time was 4 h. It was proved that the MLG treatment on micropatterning substrate may induce new morphology formation of ZnO nanostructure. It is expected that the heteroepitaxy reaction occurred between the MLG and ZnO interface. This presence method can be used as an alternative approach to control the morphology of hybrid ZnO nanostructure growth.