Solid‐state precipitation can be used to tailor material properties, ranging from ferromagnets and catalysts to mechanical strengthening and energy storage. Thermoelectric properties can be modified by precipitation to enhance phonon scattering while retaining charge‐carrier transmission. Here, unconventional Janus‐type nanoprecipitates are uncovered in Mg3Sb1.5Bi0.5 formed by side‐by‐side Bi‐ and Ge‐rich appendages, in contrast to separate nanoprecipitate formation. These Janus nanoprecipitates result from local comelting of Bi and Ge during sintering, enabling an amorphous‐like lattice thermal conductivity. A precipitate size effect on phonon scattering is observed due to the balance between alloy‐disorder and nanoprecipitate scattering. The thermoelectric figure‐of‐merit ZT reaches 0.6 near room temperature and 1.6 at 773 K. The Janus nanoprecipitation can be introduced into other materials and may act as a general property‐tailoring mechanism.
Mg3Sb2-based thermoelectric materials attract attention for applications near room temperature. Here, Mg-Bi films were synthesized using magnetron sputtering at deposition temperatures from room temperature to 400 °C. Single-phase Mg3Bi2 thin films were grown on c-plane-oriented sapphire and Si(100) substrates at a low deposition temperature of 200 °C. The Mg3Bi2 films grew epitaxially on c-sapphire and fiber-textured on Si(100). The orientation relationships for the Mg3Bi2 film with respect to the c-sapphire substrate are (0001) Mg3Bi2‖(0001) Al2O3 and [11 0] Mg3Bi2‖[11 0] Al2O3. The observed epitaxy is consistent with the relatively high work of separation, calculated by the density functional theory, of 6.92 J m−2 for the Mg3Bi2 (0001)/Al2O3 (0001) interface. Mg3Bi2 films exhibited an in-plane electrical resistivity of 34 μΩ m and a Seebeck coefficient of +82.5 μV K−1, yielding a thermoelectric power factor of 200 μW m−1 K−2 near room temperature.
1 December 2020 in Surface and Coatings Technology