5 July 2023 in IEEE Access
Validation measurements for the Future Railway Communication System in railway environments is a very challenging task and should be reduced to a minimum for cost and time efficiency. " zero-on-site testing " consists of using simulation/emulation tools and testing procedures to allow validation and verification activities in the laboratory to avoid complex and expensive trials with trains on real-world sites. A solution to test a communication network in a laboratory under realistic conditions consists of injecting perturbations at the IP level (such as additional delay, packet losses, or jitters). It is essential to correlate the IP impairments with the radio environment, their effects on end-to-end transmission, and how the network and its elements react. To do so, IP impairments (or the conditions that lead to them) should be generated in such a way that allows assessing their impact on the performance of transmissions. This paper presents the results of an experimental research based on an original emulation platform (Emulradio4Rail platform), able to emulate and test wireless systems taking into account both physical layer as well as IP traffic in realistic railway environments. Different types of IP traffics are injected at the application layer and go through the platform. The work aimed at extracting various statistical distributions of classical IP metrics (delay, packet loss, jitter, throughput) versus time, as a function of radio channel conditions for Wi-Fi and LTE transmissions in typical railway environments. Then, the modeled IP impairments statistical distributions can be considered at the IP level to test very easily wireless system modems. The results and methodology can be considered for the evaluation of the Future Railway Mobile Communication System modems.
11 May 2023 in IEEE Sensors Letters
Cognitive radio (CR) is an emergent technology that is considered for more efficient spectrum utilization. Spectrum Sensing (SS), i.e. detection of primary user (PU) in the frequency band, is one of the key tasks of cognitive radio systems. Recently, various works on the support vector machine (SVM)-assisted covariance-based spectrum sensing (CSS) in multi-receiver systems were presented and evaluated with computer simulations. However, the real environment is different, especially since the noise is often assumed to be spatially uncorrelated, while it is correlated in reality. Therefore, we propose a four-receivers software-defined radio (SDR)-based test platform for experimental evaluation of SVM-assisted CSS techniques. Furthermore, we implement an SVM-assisted CSS technique in the proposed platform to assess its performance when two and four receivers are activated. The measurements showed that increasing the number of receiving channels does indeed enhances the detection probability. Moreover, we evaluated the algorithm in both white and correlated noise scenarios. The evaluation demonstrates how the presence of correlated noise deteriorated the performance of the SVM-assisted CSS compared with the case where only white noise is present. More specifically, the simulations showed that to reach 99% detection probability when noise correlation is present, the implemented algorithm requires an SNR value that is $\text{10}~dB$ greater than the one required when white noise only is present.
5 October 2022 in IEEE Sensors Letters
One of the key tasks of cognitive radio systems is spectrum sensing (SS), which allows secondary user devices to detect the presence or absence of a primary user (PU) in the frequency band. Among the various proposed sensing techniques, the eigenvalue-based SS (ESS) is known for having a high detection rate without requiring any knowledge about the PU or the noise level. Although some experimental studies on ESS techniques have been conducted in the literature, more practical assessments are still needed before industrial integration. Therefore, we propose an experimental testbed for ESS algorithms performance evaluation with up to four receiving (Rx) channels using the USRP N310 software-defined radio. Furthermore, we experimentally demonstrate that the maximum-to-minimum eigenvalue and the mean-to-square extreme eigenvalue techniques have identical performances, even with up to four Rx channels. In addition, our simulations show that proper selection of the ESS technique can enhance the detection probability by 70.8 $\%$ with a relatively low number of samples (500) at a low signal-to-noise ratio (−12 dB) when four Rx channels are used.
2 July 2024 in IEEE Sensors Journal
Spectrum sensing (SS) plays a pivotal role in cognitive radio systems, facilitating efficient spectrum utilization. Covariance-based spectrum sensing (CSS) techniques have demonstrated superior performance compared to traditional methods. Recently, the integration of machine learning (ML) models has further improved CSS algorithms. In this study, we introduce a novel ML-assisted CSS algorithm and evaluate its efficacy using real-world datasets, considering practical hardware imperfections. In addition, we examine its performance in the presence of the α-stable distributed noise, in its impulsive and white Gaussian forms. Additionally, we conduct comparative experiments with various ML-aided CSS techniques. Our experimental results consistently highlight the superiority of the proposed ML-assisted CSS algorithm over alternative methods, regardless of the ML model employed. Furthermore, our findings underscore the impact of realistic noise conditions, attributed to hardware imperfections and correlated noise, on the performance of CSS algorithms. This insight emphasizes the importance of considering practical factors and different types of noise in the design and evaluation of spectrum sensing techniques.