Measurements of beam stability for mid-infrared (IR)-emitting quantum cascade lasers (QCLs) are important for applications that require the beam to travel through air to remote targets, such as free-space communication links. We report beam-quality measurement results of narrow-ridge, 4.6 µm-emitting buried-heterostructure (BH) QCLs fabricated using ICP etching and HVPE regrowth. Beam-quality measurements under QCW operation exhibit M2 < 1.2 up to 1 W for ∼5 µm-wide ridges. 5 µm-wide devices display some small degree of centroid motion with increasing output power (< 0.125 mrad), which corresponds to a targeting error of ∼1.25 cm over a distance of 100 m.
31 October 2019 in IEEE Journal of Selected Topics in Quantum Electronics
A three-element phase-locked array of ~5.3 μm-emitting quantum cascade lasers fabricated by a two-step MOCVD process is demonstrated which operates in a diffraction-limited beam to 5.3 W peak pulsed power. To compensate for overetching at the array edges, the fabrication process was modified such that it resulted in array elements of equal width. The resulting array operates in a pure in-phase array mode, in agreement with simulations based on the actual device dimensions, which indicate that resonant leaky-wave coupling occurs for this device's geometry. Measured uniform near-field intensity profiles confirm resonant coupling. Simulations indicate that chirping of the element widths would allow for modification of the near-field intensity profile to mitigate the effects of thermal lensing in continuous-wave operation
We present a reverse-taper quantum cascade laser (QCL) emitting at 4.6 μm, a novel-geometry device that can scale the output power while maintaining good beam quality. Buried-ridge waveguides with tapered and straight regions were formed by ICP etching and HVPE regrowth – the tapered region scales the output power, while the emitting facet is located at the narrow-end taper section, which provides mode filtering by suppressing high-order spatial modes. Beam profiles were observed under quasi-continuous-wave (QCW)/CW operation and beam quality (M 2 ) measurements along with beam-stability measurements were performed – a small degree of collimated-beam centroid movement (<0.46 mrad, peak-to-peak) was observed, along with M 2 values close to 1 up to ∼1 W QCW power. Devices of shorter cavity lengths were also investigated, indicating that the output power scales with the core-region volume but results in a small increase in angular deviation.
20 April 2021 in IEEE Photonics Technology Letters
Grating-coupled, surface-emitting (GCSE) quantum-cascade lasers (QCLs) of linear geometry generally operate in an antisymmetric mode, which is undesirable due to its double-lobed far-field beam pattern. The antisymmetric mode can be suppressed by designing 2nd-order metal/semiconductor gratings that favor symmetric-mode operation, but using such an approach requires tight tolerances in grating duty cycle that impair fabrication yields. Alternatively, the grating can be designed to favor antisymmetric-mode operation with single-lobe emission by using a central π-phaseshift. Here we show that such a design is highly fabrication tolerant. Simulations using COMSOL Multiphysics are performed followed by finite-length analysis using coupled-mode theory and the transfer-matrix method, as well as a semi-empirical QCL model for predicting CW performance. The analysis reveals a device of significantly higher tolerance for fabrication errors, operating in a single-lobe beam pattern to 0.63 W CW, although the emitted power scales less efficiently with length than for symmetric-mode operating devices.
Errors have been found in subsection 3.2 (i.e., in page 1384) of our paper [ Opt. Mater. Express 8, 1378 (2018) 10.1364/OME.8.001378 ] as far as the identification of the grown layers within one period, for the quantum cascade laser structure shown in Figure 1(a). The correct text is as follows.