Sunil Mandal

Sunil Mandal

Auto-generated profile, based on publicly available information

Sunil Mandal

Department of Electrical and Electronics Engineering, National Institute of Technology Karnataka (NITK), Surathkal, Mangaluru, India

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 August 2025 in IEEE Access
Verified
Journal Article
Open access
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
DDD. Arun Dominic
D. Arun Dominic
APArun P. Parameswaran
Arun P. Parameswaran
The growing demand for efficient and compact power conversion systems in electric vehicles (EVs), renewable energy systems, DC microgrids, and both portable and stationary medical equipment has intensified research into non-isolated high-gain bidirectional DC-DC converters. Existing solutions often employ transformer-based topologies or coupled inductors, which introduce increased cost, size, and control complexity. This paper presents a novel transformerless bidirectional high-gain DC-DC converter based on a modified Single-Ended Primary Inductor Converter (SEPIC) architecture. The proposed topology incorporates an Active Switched Inductor (ASL) at the input stage to achieve a wide voltage conversion ratio while ensuring reduced voltage stress on the maximum power switches. A key feature of the converter is its ability to provide bidirectional buck–boost operation in both power flow directions, while maintaining a reduced component count and improved efficiency through synchronous rectification. The converter’s performance is thoroughly analyzed under both continuous conduction mode (CCM) and discontinuous conduction mode (DCM). Furthermore, detailed small-signal modeling and closed-loop controller design are developed for both voltage-mode and current-mode control. A 200 W experimental prototype employing SiC MOSFETs is implemented to validate the theoretical analysis. Experimental results confirm the high efficiency, robust dynamic response, and practical feasibility of the proposed converter for next-generation power conversion applications.

14 May 2025 in IEEE Journal of Emerging and Selected Topics in Power Electronics
Verified
Journal Article
Closed access
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
High-gain, non-isolated bidirectional DC-DC converters play a vital role in interfacing energy storage systems with microgrids and electric vehicles. However, existing converters often operate within a limited duty cycle range and involve high component counts and significant voltage stress for achieving desired voltage gains. This paper presents a novel non-coupled high-gain bidirectional DC-DC converter that efficiently operates in boost mode for forward power flow and buck mode for reverse power flow. Based on a modified Zeta converter topology, the proposed converter offers a simplified circuit structure and control strategy, requiring fewer components. It achieves wide voltage gain across an extended duty cycle range while minimizing voltage stress on most switches. A 200 W prototype has been developed and tested in the laboratory to validate the converter’s performance. To enhance efficiency, SiC MOSFETs are utilized, achieving a peak efficiency of 96%. Experimental results confirm the converter’s suitability for both open-loop and closed-loop configurations, highlighting its potential for diverse applications in energy storage systems and electric vehicles.

24 December 2025 in IEEE Transactions on Consumer Electronics
Verified
Journal Article
Closed access
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
Non-isolated, high-gain, bidirectional DC-DC converters (BDCs) are essential for efficient power flow control in energy storage systems deployed in microgrids, electric vehicles (EVs), and other industrial power conversion applications. However, existing converter topologies are often limited by narrow duty cycle ranges, high component counts, and significant voltage stress in achieving the required voltage gain. This paper proposes a non-coupled, high-gain bidirectional DC-DC converter designed to address these limitations. The proposed converter operates boost mode in one power flow direction and buck mode in reverse power flow direction, optimizing performance across a wider range of operating conditions. The converter’s design is based on the integration of a modified bidirectional SEPIC converter topology with an active switched inductor (ASL) at the front end. This results in a simplified circuit architecture and control strategy, requiring fewer components while effectively minimizing voltage stress on most switches. Additionally, SiC MOSFET is implemented to enhance the efficiency of the proposed topology. The converter is rated for 250 W, and a prototype was developed and tested in the laboratory. The experimental setup demonstrated a peak efficiency of 97.78%, validating the converter’s performance. The results confirm that the converter is well-suited for both open-loop and closed-loop control configurations, demonstrating its potential for a wide array of applications.

7 October 2025 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
SPSourav Prasad
Sourav Prasad
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
ADArun Dominic
Arun Dominic
While bipolar configurations in DC nanogrids offer numerous advantages, they typically rely on a substantial number of standalone DC-DC converters to supply power to both poles of the grid. Furthermore, voltage imbalances frequently occur due to unequal load distribution between the poles. To address these challenges, this paper describes a novel Input Parallel Output Series Boost-Cuk (IPOSBC) converter that transfers energy from a single source to both poles, effectively reducing the overall converter count in the DC nanogrid system. The proposed converter features an interleaved structure that minimizes source current ripple, delivers a bipolar output with enhanced voltage gain, and achieves zero-voltage switching for two switches, thereby improving overall efficiency. Additionally, the paper presents a unique voltage imbalance mitigation strategy that leverages the proposed converter's bidirectional operation. In this approach, the converter absorbs the neutral line current and redistributes it equally between the positive and negative poles of the bipolar DC nanogrid, balancing the pole voltages without the need for an active power source connected to its input terminals. This reduction in neutral line current also decreases the overall line losses in the nanogrid system. The feasibility and effectiveness of these techniques are validated through theoretical analysis and experimental results from a 250W hardware prototype of the IPOSBC converter.

26 March 2026 in IEEE Transactions on Consumer Electronics
Verified
Journal Article
Closed access
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
MRMegha Rajagopal
Megha Rajagopal
This paper presents a novel transformerless bidirectional buck–boost (BBB) high-gain DC–DC converter with multi-power-flow capability. The proposed topology integrates an active switched-inductor (ASL) network into the front-end of a conventional SEPIC converter, enabling a wide voltage conversion ratio while significantly reducing the voltage stress across the main power semiconductor devices. The converter supports BBB operation in both directions of power flow with a reduced component count. A key feature of the proposed converter is its multifunctional operation, allowing seamless power transfer in PV-to-DC-grid, battery-to-DC-grid, and DC-grid-to-battery modes. In addition, synchronous rectification is employed in the complementary switches to further enhance conversion efficiency. The converter’s operational principles are analysed with detailed steady-state derivations for continuous conduction mode (CCM) and discontinuous conduction mode (DCM). A dynamic model is developed, and closed-loop controllers are designed for voltage and current regulation. A prototype employing SiC MOSFETs is developed and tested. Experimental results confirm high efficiency, stable operation, and practical feasibility, demonstrating the converter’s potential for energy storage applications in microgrids, electric vehicles (EVs), and industrial power systems.

9 December 2025 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
Verified
Journal Article
Closed access
SMSunil Mandal
Sunil Mandal
PPPrajof Prabhakaran
Prajof Prabhakaran
SAShreyas S Aney
Shreyas S Aney
This article presents a novel nonisolated bidirectional buck–boost dc–dc converter without employing a transformer or coupled inductor. An active switched inductor network is integrated into the front-end section of a modified SEPIC converter, facilitating a wide voltage conversion ratio while reducing voltage stress on the major switches. The proposed converter offers multifunctional capabilities, enabling seamless integration with photovoltaic (PV) systems, battery storage, and dc grids. The battery can be charged either from the PV system or directly from the dc grid, enhancing system flexibility. Furthermore, synchronous rectification is implemented using complementary switching to improve conversion efficiency. The steady-state analysis is presented for both continuous conduction mode and discontinuous conduction mode. A dynamic model of the converter is developed, and its performance is validated under both open-loop and closed-loop conditions using SiC mosfets. Experimental results verify the enhanced performance and practicality of the proposed converter for energy storage systems in dc grids, electric vehicles, and other industrial power conversion applications.