Eric Matthias Hollmann

Eric Matthias Hollmann

Auto-generated profile, based on publicly available information

Eric Matthias Hollmann

University of California—San Diego

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 September 2025 in Nuclear Fusion
Verified
Journal Article
Open access
IBI. Bandyopadhyay
I. Bandyopadhyay
VIV. Igochine
V. Igochine
OSO. Sauter
O. Sauter
SSS.A. Sabbagh
S.A. Sabbagh
JPJ.-K. Park
J.-K. Park
HZH. Zohm
H. Zohm
In this chapter, we review the progress in MHD stability, disruptions and control in magnetic fusion research that has occurred over the past (more than) one and a half decades since the publication by Hender et al in 2007 on the same topic as part of the update of ITER Physics Basis. During this period, remarkable progress has been achieved in the understanding of the basic physics and overall control of MHD instabilities through a wide spectrum of dedicated experiments, theory and modeling. The sawtooth activities are probably today one of the best understood of MHD events and very robust control schemes have been developed for reliable operation of tokamaks through core heating. Similarly, significant improvements have been achieved in understanding and control of neoclassical tearing modes, resistive wall modes or locked modes and their control through ECCD or error field control. The field of disruption prediction through application of artificial intelligence, machine learning or deep learning methods, which had already started at the time of the 2007 review, has progressed significantly due to general progress in these fields and application of newer, more sophisticated algorithms. However, although remarkable progress has been achieved in the field of Disruptions, their understanding, prediction, possible avoidance and mitigation still remain probably the most active fields of R&D globally in this field. This is especially because reactor grade machines like ITER and DEMO will be much less tolerant in respect of disruptions and runaway currents, and their occurrences must be either avoided altogether or minimized to an acceptable value without causing any significant hindrance to robust machine operations. This review is intended to present a broad spectrum of the R&D that has occurred in this field in support of ITER, which will also be of immense significance for all future machines, especially reactors like DEMO.

1 August 2020 in Physics of Plasmas
Verified
Journal Article
Closed access
PDF file
TOT. Odstrčil
T. Odstrčil
NHN. T. Howard
N. T. Howard
FSF. Sciortino
F. Sciortino
CCC. Chrystal
C. Chrystal
CHC. Holland
C. Holland
TWT. M. Wilks
T. M. Wilks
Laser blow-off injections of aluminum and tungsten have been performed on the DIII-D tokamak to investigate the variation of impurity transport in a set of dedicated ion and electron heating scans with a fixed value of the external torque. The particle transport is quantified via the Bayesian inference method, which, constrained by a combination of a charge exchange recombination spectroscopy, soft x-ray measurements, and vacuum ultraviolet spectroscopy provides a detailed uncertainty quantification of transport coefficients. Contrasting discharge phases with a dominant electron and ion heating reveal a threefold drop in the impurity confinement time and order of magnitude increase in midradius impurity diffusion, when additional electron heating is applied. Furthermore, the calculated stationary aluminum density profiles reverse from peaked in electron heated to hollow in the ion heated case, following a similar trend to electron and carbon density. Comparable values of a core diffusion have been observed for W and Al ions, while differences in the propagation dynamics of these impurities are attributed to pedestal and edge transport. Modeling of the core transport with non-linear gyrokinetics code CGYRO [J. Candy and E. Belly, J. Comput. Phys. 324, 73 (2016)], significantly underpredicts the magnitude of the variation in Al transport. Diffusion increases three-times steeper with additional electron heat flux, and 10-times lower diffusion is observed in ion heated case than predicted by the modeling. The CGYRO model quantitatively matches the increase in the Al diffusion when approaching the linear threshold for the transition from the ion temperature gradient to trapped electron mode.

1 April 2020 in Physics of Plasmas
Verified
Journal Article
Open access
PDF file
EHE. M. Hollmann
E. M. Hollmann
IBI. Bykov
I. Bykov
NEN. W. Eidietis
N. W. Eidietis
JHJ. L. Herfindal
J. L. Herfindal
ALA. Lvovskiy
A. Lvovskiy
JWJ. Watkins
J. Watkins
A 1D radial diffusion model is developed to study the observed rapid expulsion of argon from the runaway electron plateau in the DIII-D tokamak following secondary massive low-Z ( D 2 or He) gas injection. The expulsion of argon is found to be caused by further cooling of the background plasma due to the added neutrals, accompanied by recombination of argon ions and the greatly increased outward radial transport rate of argon (now dominantly in neutral form) out of the runaway electron beam. After argon expulsion, power loss out of the runaway electron plateau is found to be dominated by neutral transport to the wall (rather than by radiation); this result resolves the power balance discrepancy highlighted in previous work on argon expulsion out of the runaway electron plateau.

1 May 2026 in Plasma Physics and Controlled Fusion
Verified
Journal Article
Open access
PDF file
SRS Ratynskaia
S Ratynskaia
HMHoelzl Matthias
Hoelzl Matthias
ENE Nardon
E Nardon
PAP Aleynikov
P Aleynikov
FAF J Artola
F J Artola
RVR Villari
R Villari
This Roadmap article addresses the critical and multifaceted challenge of plasma-facing component (PFC) damage caused by runaway electrons (REs) in tokamaks, a phenomenon that poses a significant threat to the viability and longevity of future fusion reactors such as ITER and DEMO. The dramatically increased RE production expected in future high-current tokamaks makes it very difficult to avoid or mitigate REs in such devices when a plasma discharge terminates abnormally. Preventing damage from the intense localized heat loads they can cause requires a holistic approach that considers plasma, REs and PFC damage. Despite decades of progress in understanding the physics of REs and the thermomechanical response of PFCs separately, their complex interplay remains poorly understood. This document aims to initiate a coordinated, interdisciplinary approach to bridge this gap by reviewing experimental evidence, advancing diagnostic capabilities, and improving modeling tools across different scales, dimensionalities, and fidelities. Key topics include RE beam formation and transport, damage mechanisms in both brittle and metallic PFCs, and observed effects in major facilities such as JET, DIII-D, WEST and EAST. The Roadmap emphasizes the urgency of predictive, high-fidelity modeling validated against well-diagnosed controlled experiments, particularly in the light of recent changes in ITER’s wall material strategy and the growing importance of private sector fusion initiatives. The modeling gaps include calculations of the magnetic equilibrium, RE distribution function and background plasma properties at the start of the beam termination, with a critical need to advance modeling of access conditions to benign terminations. This is to be followed by simulations of the termination itself which requires a self-consistent description of the 3D MHD fields together with the REs, which is now available thanks to recent developments. Finally, the damage assessment is enabled by modeling of the full thermo-mechanical response, encompassing the hydrodynamic and the deviatoric behavior, to RE impacts with characteristics as provided by the termination simulations. The full workflow is computationally heavy for scoping studies to assist design of future machines, calling for development of reduced or surrogate models. Each section of the Roadmap article is written to provide a concise overview of one area of this multidisciplinary subject, with an assessment of the status, a look at current and future challenges, and a brief summary. The ultimate goal of this initiative is to guide future mitigation strategies and design resilient components that can withstand the intense localized loads imposed by REs, thus ensuring the safe and sustainable operation of the next generation of fusion power plants.

24 October 2017 in Physica Scripta
Verified
Journal Article
Open access
PDF file
IBI Bykov
I Bykov
CCC P Chrobak
C P Chrobak
TAT Abrams
T Abrams
DRD L Rudakov
D L Rudakov
EUE A Unterberg
E A Unterberg
AMA G McLean
A G McLean
Unipolar arcing was an important mechanism of metal surface erosion during the recently conducted Metal Rings Campaign in DIII-D when two toroidally continuous tile rings with 5 cm wide W-coated TZM inserts were installed in graphite tiles in the lower divertor, one on the floor and one on the shelf. Most of the arc damage occurred on the shelf ring. The total amount of W removed by arcing from the affected ~4% of the shelf ring area was estimated ~0.8 × 1021 at., about half of the total amount of W eroded and redeposited outside the inserts (1.8 ± 0.9)×1021 at. The rings were exposed for a total of ~480 discharges, an equivalent of plasma time on W surfaces (with MA) ~103 s. Arcing was monitored in situ with WI (400.9 nm) filtered camera and photomultipliers and showed that: (i) arcing only occurred during ELMs and disruptions, (ii) arcing rate was much lower on the floor than on the shelf ring, and (iii) arcing had a low cut off power flux density about 2 MW m−2. About half of arc tracks had large pitch angle and probably were produced during disruptions. Such tracks were only found on the shelf. Moderate toroidal variation of the arc track density and W erosion with nearly n = 1 pattern has been measured.

21 August 2019 in Nuclear Fusion
Verified
Journal Article
Closed access
EHE.M. Hollmann
E.M. Hollmann
NEN.W. Eidietis
N.W. Eidietis
JHJ.L. Herfindal
J.L. Herfindal
PPP.B. Parks
P.B. Parks
APA.Y. Pigarov
A.Y. Pigarov
RWR. Wilcox
R. Wilcox