14 January 2020 in IEEE Access
With the increasing popularity of electric vehicles, low level of automation for charging process has become one of the main factors restricting the development of electric vehicles. Recently, auto-charging robots which have the ability to transform manual process plugging charging plugs into charging ports to automatic plugging-unplugging operation have arisen. This paper presents a 4-DOF cable-driven auto-charging robot (CDACR) consisting of a 3-DOF cable-driven serial manipulator (CDSM) and a moving platform. In this design, the 3-DOF CDSM is actuated by six cables being routed through five disks fixed to the CDSM's rigid links. The end-effector of CDACR is a flexible plug that has the ability to withstand small elastic deformation. The control algorithm and the plugging-unplugging strategy were designed to respond to various parking situations with or without yaw error. This paper takes the lead in introducing the cable-driven robot into the field of automatic charging. Besides, through simulated charging experiments, the feasibility and effectiveness of using CDACR to realize auto-charging for electric vehicles has been demonstrated.
24 June 2021 in IEEE Access
The maturity of automatic driving and parking technologies is gradually driving electric vehicle charging toward automation. The primary condition of automatic charging that has a high significance is the identification of electric vehicle charging ports. This research proposes an automatic system for the identification and positioning of charging ports of electric vehicles. The system is mainly divided into rough and precise positioning. The former is based on the Hough circle and the Hough line, and locates the position information of the charging port. The latter uses the Canny operator to obtain the contour information of the original and gradient images respectively. All the contours of the two images are fitted into ellipses by the quadratic curve standardization (QCS) method, and irrelevant ellipses are screened out. Finally, the perspective-n-point (PNP) algorithm is used to locate the pose information of the charging port. The aubo-i10 6-DOF articulated robot is used to test the recognition and insertion accuracies in different environments. The results show that the average recognition rate of rough positioning is 97.9%, the average displacement error of precise positioning in X, Y and Z directions are 0.60, 0.83 and 1.23 mm, respectively, and the average angle errors in RX, RY and RZ directions are 1.19, 0.97 and 0.50 degrees, respectively. The average success rate is 94.8%. These results demonstrate that the proposed system meets the basic plug-in requirements of electric vehicle charging ports.
28 December 2023 in IEEE/ASME Transactions on Mechatronics
Multilink cable-driven redundant manipulators (MCDRMs) offer numerous advantages over conventional manipulators, making them well suited for operation in narrow and confined environments. However, MCDRMs face limitations in terms of cable quantity and cable routing scheme, which are crucial for achieving full constraint. Force closure, a crucial parameter for evaluating the performance of MCDRMs, ensures that the manipulator can exert sufficient force and torque to stably perform tasks within its workspace. In this article, we propose a novel force-closure analysis method for MCDRMs that considers both cable coupling and friction effects. First, we utilize the Euler–Eytelwein equation to analyze the effect of friction between cables and cable routing holes on the tension of different cable subsegments. Then, utilizing the reciprocal screw theory, we elucidate the cable coupling in MCDRMs and calculate the active joint torques provided by the cable tension, as well as passive joint torques generated by external wrenches. Furthermore, we analyze the force closure of the MCDRM by balancing the passive and active joint torques. Finally, simulations and experiments are conducted using a planar MCDRM. The results demonstrate that the proposed method enables systematic and accurate analysis of the force closure of MCDRDs with arbitrary cable routing schemes.