1 January 2017 in Materials Today: Proceedings
6 June 2018 in Nanotechnology
Carbon nano-onions (CNOs), in their spherical or polyhedral forms, represent an important class of nanomaterials, due to their peculiar physical and electrochemical properties. Among the different methods of production, arc discharge between graphite electrodes sustained by deionized water is one of the most promising to obtain good quality CNOs in gram quantities. We applied the method with the aim to optimize the production of CNOs, using an innovative experimental arrangement. The discharges generate dispersed nanomaterials and a black hard cathodic deposit, which were studied by transmission electron microscopy–high-resolution TEM, scanning electron microscopy, Raman, thermogravimetric analysis and energy-dispersive x-ray spectroscopy. A simple mechanical grinding of the deposits permitted us to obtain turbostratic polyhedral CNOs that exhibited higher stability towards burning in air, compared to CNOs found in water. We propose a mechanism for the formation of the CNOs present in the deposit, in which the crystallization is driven by a strong temperature gradient existing close to the cathode surface at the beginning of the process, and subsequently close to the deposit surface whenever it is growing.
1 January 2015 in AIP Conference Proceedings
Dyes are usually used in textile manufacturing and are one of the major contaminations in water. Thus, from an environmental point of view, the removal of dyes is of great concern, and recent applications using carbon-based materials showed high adsorption ability. In this work we use graphene oxide (GO) produced by improved Hummer’s method, for adsorption of acridine orange dye (AO) in water. GO is a material containing functional groups such as carboxyl, epoxy, ketone, and hydroxyl, that can adsorb cationic dyes. Factors such as initial concentration of dye, the amount of GO, temperature and contact time were evaluated. Results show that the adsorption equilibrium, with the removal of 40% of the dye, is reached in approximately 1 hour, and that the adsorption capacity increases at higher initial concentrations. The highest value of AO adsorbed was 229.8 mg/g equivalent to 92% removal percentage by using AO initial concentration 0.10 mg/mL. FT-IR analysis of GO with adsorbed AO shows changes in the stretching vibrational bands, which corroborate the AO/GO interaction due to the functional groups present in GO. Furthermore, AO adsorbed on GO does not desorb back into water. Our results show that GO is an effective adsorbent and could be used to treat effluents contaminated with dyes.
1 January 2015 in AIP Conference Proceedings
Doxorubicin hydrochloride (DOX), is a class I anthracycline antibiotic (FDA approved in the 1970s) widely used as an effective chemotherapeutic drug for the treatment of many human neoplasms. Like most anticancer drugs, DOX can provoke severe toxicity to the body when it is administered at high doses systemically. Here we report the results of an investigation of drug adsorption on graphene oxide (GO) materials prepared by the Improved Hummer's method. High-purity GO has been prepared, characterized by XPS, UV-vis, FTIR-ATR, FESEM, UV- vis analyses, Zero Point Charge determinations and applied in the immobilization of doxorubicin, via simple noncovalent method. The adsorption percentage of the drug at pH 7 on GO was observed to be higher (equal to 90 %) than that obtained at acidic pH 3 (equal to 85%). Experimental result of adsorption of DOX on GO, obtained by FTIR-ATR spectroscopy analysis indicate that the inorganic material and the drug form and adduct by π-π stacking interactions.
3 January 2018 in Physical Review B
Silicene, the two-dimensional allotrope of silicon, is predicted to exist in a low-buckled honeycomb lattice, characterized by semimetallic electronic bands with graphenelike energy-momentum dispersions around the Fermi level (represented by touching Dirac cones). Single layers of silicene are mostly synthesized by depositing silicon on top of silver, where, however, the different phases observed to date are so strongly hybridized with the substrate that not only the Dirac cones, but also the whole valence and conduction states of ideal silicene appear to be lost. Here, we provide evidence that at least part of this semimetallic behavior is preserved by the coexistence of more silicene phases, epitaxially grown on Ag(111). In particular, we combine electron energy loss spectroscopy and time-dependent density functional theory to characterize the low-energy plasmon of a multiphase-silicene/Ag(111) sample, prepared at controlled silicon coverage and growth temperature. We find that this mode survives the interaction with the substrate, being perfectly matched with the -like plasmon of ideal silicene. We therefore suggest that the weakened interaction of multiphase silicene with the substrate may provide a unique platform with the potential to develop different applications based on two-dimensional silicon systems.