4 January 2016 in Aircraft Engineering and Aerospace Technology
Purpose – The purpose of this study is to develop an active controller of both leading-edge (LE) and trailing-edge (TE) control surfaces for an unmanned air vehicle (UAV) with a composite morphing wing. Design/methodology/approach – Instead of conventional hinged control surfaces, both LE and TE seamless control surfaces were integrated with the wing. Based on the longitudinal state space equation, the root locus plot of the morphing wing aircraft, with a stability augmented system, was constructed. Using the pole placement, the feedback gain matrix for an active control was obtained. Findings – The aerodynamic benefits of a morphing wing section are compared with a wing of a rigid control surface. However, the 3D morphing wing with a large sweptback angle produces a washout negative aeroelastic effect, which causes a significant reduction of the control effectiveness. The results show that the stability augmentation system can significantly improve the longitudinal controllability of an aircraft with a m...
1 April 2020 in Mechanical Systems and Signal Processing
1 January 2009 in International Journal of Modelling, Identification and Control
This paper presents an investigation into the controllability for an aircraft of seamless aeroelastic wing. The research is aimed at the design of control laws for the aircraft rolling by actively operating a pair of an unconventional hingeless flexible leading and trailing control surfaces at different flight speed. The main challenge is how to achieve a specified rolling rate for the aircraft when the control effectiveness drops down and even crosses over the rolling reversal point within the flight envelope. This phenomenon is mainly due to the aeroelastic effect of the large sweptback and highly flexible wing design for weight saving. The investigation shows that control laws varying with the flight speed can be designed to achieve the rolling control target.