27 April 2012 in Optics Letters
When a transparent plane-parallel plate is illuminated at a boundary region by a monochromatic parallel beam of light, Fresnel diffraction occurs because of the abrupt change in phase imposed by the finite change in refractive index at the plate boundary. The visibility of the diffraction fringes varies periodically with changes in incident angle. The visibility period depends on the plate thickness and the refractive indices of the plate and the surrounding medium. Plotting the phase change versus incident angle or counting the visibility repetition in an incident-angle interval provides, for a given plate thickness, the refractive index of the plate very accurately. It is shown here that the refractive index of a plate can be determined without knowing the plate thickness. Therefore, the technique can be utilized for measuring plate thickness with high precision. In addition, by installing a plate with known refractive index in a rectangular cell filled with a liquid and following the described procedures, the refractive index of the liquid is obtained. The technique is applied to measure the refractive indices of a glass slide, distilled water, and ethanol. The potential and merits of the technique are also discussed.
12 July 2012 in Applied Optics
MTMohammad Taghi Tavassoly
We introduce a relatively simple and efficient optical technique to measure nanoscale displacement based on visibility variations of the Fresnel diffraction fringes from a two-dimensional phase step. In this paper we use our technique to measure electromechanical expansions by a thin piezoelectric ceramic and also thermal changes in the diameter of a tungsten wire. Early results provide convincing evidence that sensitivity up to a few nanometers can be achieved, and our technique has the potential to be used as a nanodisplacement probe.
1 October 2009 in Applied Optics
When a thin film that is prepared in a step form on a substrate and coated uniformly with a reflective material is illuminated by a parallel coherent beam of monochromatic light, the Fresnel diffraction fringes are formed on a screen perpendicular to the reflected beam. The visibility of the fringes depends on film thickness, angle of incidence, and light wavelength. Measuring visibility versus incident angle provides the film thickness with an accuracy of a few nanometers. The technique is easily applicable and it covers a wide range of thicknesses with highly reliable results.
1 March 2016 in Applied Optics
MTMohammad Taghi Tavassoly
In this work we present the theoretical background and experimental procedure to measure the thickness of thin films by analyzing Fresnel diffraction patterns obtained from polychromatic illumination of phase-step samples. As examples of this technique, we measured the thicknesses of thin aluminum layers on glass substrates using three different broad-spectrum light sources. The results are in excellent agreement with independent interferometric measurements within less than 5% relative uncertainties.
30 June 2020 in Optics Letters
A field-portable, single-shot and very simple method is presented for measuring the full complex degree of coherence (CDC) of a quasi-monochromatic Schell-model field using the Fresnel diffraction from a phase discontinuity. To validate the proposed technique, the CDC of the light emitted from an incoherent source with variable size is investigated. The results are in excellent agreement with theoretical predictions of the Van Cittert–Zernike theorem. This technique is also applicable to characterize the coherence properties of sources in other spectral regions, e.g., x-rays.
17 August 2018 in Journal of Optics
Determination of the spectral profile of light signals is an effective way to characterize the structure and dynamics of materials, and also light sources. In this work, we introduce a simple, fast, and cost effective line fitting technique, in which Fresnel diffraction from a phase step is used to determine the central wavelength and linewidth of the spectra of light sources. In principle, a single diffraction pattern suffice to determine the line profile. As proof-of-principle examples, two light emitting diode sources have been investigated using phase steps with different heights. Reproducible results are obtained with relative uncertainties in the order of 10 −2 for both the central wavelength and linewidth. Comparison with conventional spectroscopy measurements are also provided.