1 January 2022 in Image Journal of Advanced Materials and Technologies
In this paper, we experimentally compare the field emission characteristics of two different cathodes based on polyacrylonitrile fibers (PAN fibers) and carbon nanotube fibers (CNT filaments). The main purpose of the study was to compare the field emission properties of materials for the cathode unit of a cathode luminescent lamp. The current-voltage, current and watt-watt characteristics of the fabricated cathodes were measured. A comparison of the current-voltage characteristics of cathodes made of the two studied materials shows that the minimum field for the occurrence of field emission current for a cathode made of a CNT filament (accelerating voltage in the diode version of measurements is about 625 V) is approximately 3 times lower than for a cathode made of PAN fibers (accelerating voltage is about 1850 V. Accordingly, the current value of about 100 μA for a cathode based on a CNT filament is achieved at an accelerating voltage of about 1300 V, and for a cathode based on PAN fibers, about 2630 V. Structural changes in cathodes were studied using scanning electron microscopy methods. Based on the totality of the results, it was concluded that it is preferable to use a CNT filament as a cathode material. The emission current of a cathode based on a CNT filament, when a constant high voltage is applied, demonstrates an increase during the transition period and reaches a stable value of more than 75 μA, apparently due to the activation of additional emission centers when a high accelerating voltage is applied. The paper also analyzes the factors that determine the efficiency of light sources created on the basis of the materials studied in the work.
1 January 2024 in Image Journal of Advanced Materials and Technologies
Field emission and structural characteristics of carbon nanotube fibers, polyacrylonitrile fibers, pyrolytic graphite and micrograined dense graphite were experimentally studied before and after their operation as a field emission cathode using registration of the current-voltage characteristics, optical microscopy, scanning electron microscopy and Raman spectroscopy in the spectral range from 1000 to 2000 cm–1. The experiments showed large and small structural rearrangements of carbon-containing cathodes and their surfaces in the process of field emission. In addition to lines of the Raman spectra with frequency maxima in the known ranges: G (1581–1599 cm–1), D (1363–1374 cm–1) and D' (1619– 1626 cm–1), characteristic of carbon materials, a line was detected in the range 1450–1480 cm–1, which is observed in the starting materials of pyrolytic graphite, carbon nanotube fibers and persists after operation, and also appears in a sample of micro-grained dense graphite after operation as a cathode. The relative integral intensity of line D in pyrolytic graphite, micrograined dense graphite, and carbon nanotube fibers undergoes the greatest change. In pyrolytic graphite and carbon nanotube fibers its increase is observed, and in micrograined dense graphite its decrease is observed after operation as a cathode. This made it possible to use the relative integral intensity of the D-line to quantify the change in the surface properties of carbon materials as a result of field emission when using these materials as cathodes, in particular to assess changes in crystallite sizes. Thus, the possibility of using Raman spectra to control the surface structure of carboncontaining materials has been demonstrated, which significantly facilitates the possibility of further analysis of the relationship between the surface structure and its emission characteristics. The prospects for improving the field emission characteristics of carbon-containing cathodes were discussed.