Cu2Se based thermoelectric materials are of great potential for high‐temperature energy harvesting due to their high‐temperature figure‐of‐merit (zT). For further development of Cu2Se, both engineering and mid‐temperature figure‐of‐merit need to be improved. In this work, we report that carbon‐coated boron (C/B) nanoparticles incorporation can significantly improve both mid‐ and high‐temperature zT in Cu2Se. The nanoparticle inclusions can result in a homogeneous distribution of Cu:C:B interfaces responsible for both improvement of the Seebeck coefficient and significantly reduction in thermal conductivity. Ultrahigh mid‐ and high temperature thermoelectric performance with zT = 1.7 at 700 K and 2.23 at 1000 K as well as significantly improved engineering zT are achieved in the C/B incorporated Cu2Se with desirable mechanical properties and cycling stability. Our findings will stimulate further study and exploration for the Cu2Se based thermoelectric materials for broad applications in converting waste heat to electricity with competitive energy conversion efficiency.
15 December 2020 in Journal of Materials Chemistry A
By applying the melt-centrifugation, porosity and dislocations are introduced in the microstructure of the n-type Zintl phase Mg3+xSb1.5Bi0.49Te0.01leading to significantly low κl (∼ 0.33 W m−1 K−1 at 723 K) and enhanced zT (∼ 1.64 at 723 K).
24 September 2024 in ACS Applied Materials & Interfaces
Despite decades of extensive research on thermoelectric materials, Bi2Te3 alloys have dominated room-temperature applications. However, recent advancements have highlighted the potential of alternative candidates, notably Mg3Sb2-Mg3Bi2 alloys, for low- to mid-temperature ranges. This study optimizes the low-temperature composition of this alloy system through Nb addition (Mg3.2-xNbx(Sb0.3Bi0.7)1.996Te0.004), characterizing composition, microstructure, and transport properties. A high Mg3Bi2 content improves the band structure by increasing weighted mobility while enhancing the microstructure. Crucially, it suppresses detrimental grain boundary scattering effects for room-temperature applications. While grain boundary scattering suppression is typically achieved through grain growth, our study reveals that Nb addition significantly reduces grain boundary resistance without increasing grain size. This phenomenon is attributed to a grain boundary complexion transition, where Nb addition transforms the highly resistive Mg3Bi2-rich boundary complexion into a less resistive, metal-like interfacial phase. This marks the rare demonstration of chemistry noticeably affecting grain boundary interfacial electrical resistance in Mg3Sb2-Mg3Bi2. The results culminate in a remarkable advancement in zT, reaching 1.14 at 330 K. The device ZT is found to be 1.03 at 350 K, which further increases to 1.24 at 523 K and reaches a theoretical maximum device efficiency (ηmax) of 10.5% at 623 K, underscoring its competitive performance. These findings showcase the outstanding low-temperature performance of n-type Mg3Bi2-Mg3Sb2 alloys, rivaling Bi2Te3, and emphasize the critical need for continued exploration of complexion phase engineering to advance thermoelectric materials further.
The thermoelectric potential of cubic Li 3 Sb is reported for the first time through a detailed investigation of its high-temperature thermoelectric properties measured on polycrystalline specimens prepared by the stress-induced mechanochemical method.
14 August 2015 in Zeitschrift für anorganische und allgemeine Chemie