Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, North Wollongong, Australia
Auto-generated profile, based on publicly available information
Sheik Mohammad Kazi Nazrul Islam
Institute for Superconducting and Electronic Materials, Australian Institute for Innovative Materials, University of Wollongong, North Wollongong, Australia
Cu2Se based thermoelectric materials are of great potential for high‐temperature energy harvesting due to their high‐temperature figure‐of‐merit (zT). For further development of Cu2Se, both engineering and mid‐temperature figure‐of‐merit need to be improved. In this work, we report that carbon‐coated boron (C/B) nanoparticles incorporation can significantly improve both mid‐ and high‐temperature zT in Cu2Se. The nanoparticle inclusions can result in a homogeneous distribution of Cu:C:B interfaces responsible for both improvement of the Seebeck coefficient and significantly reduction in thermal conductivity. Ultrahigh mid‐ and high temperature thermoelectric performance with zT = 1.7 at 700 K and 2.23 at 1000 K as well as significantly improved engineering zT are achieved in the C/B incorporated Cu2Se with desirable mechanical properties and cycling stability. Our findings will stimulate further study and exploration for the Cu2Se based thermoelectric materials for broad applications in converting waste heat to electricity with competitive energy conversion efficiency.
27 August 2018 in Journal of Materials Chemistry A
We demonstrate that insulating-boron nanoparticle inclusion in Cu2Se has little effect on the overall power factor, but can significantly reduce the thermal conductivity, resulting in great improvement on zT, by a factor of 1.6–2.6 compared to undoped Cu2Se over a wide range of temperatures.
Solar photovoltaic (PV) and solar thermal systems are most widely used renewable energy technologies. Theoretical study indicates that the energy conversion efficiency of solar photovoltaic gets reduced about 0.3% when its temperature increases by 1°C. In this regard, solar PV and thermal (PVT) hybrid systems could be a solution to draw extra heat from the solar PV panel to improve its performance by reducing its temperature. Here, we have designed a new type of heat exchanger for solar PV and thermal (PVT) hybrid systems and have studied the performance of the system. The PVT system has been investigated in comparison with an identical solar PV panel at outdoor condition at Dhaka, Bangladesh. The experiments show that the average improvement of open circuit voltage (Voc) is 0.97 V and the highest improvement of Voc is 1.3 V. In addition, the overall improvement of output power of solar PV panel is 2.5 W.