In respect of radiation dosimetry, several applications require dose distribution verification rather than absolute dosimetry. Most protocols use radiological and radiochromic films and ionization chambers or diode arrays for dose mapping. The films are disposable which causes the precision of the results dependent on film production variability. The measurements with arrays of ionization chambers or diodes mainly lack spatial resolution. This review aims to provide an overview of the use of optically stimulated luminescence detectors (OSLDs) for one-dimensional (1D) and two-dimensional (2D) dose mapping in different applications. It reviews the ideas, OSL materials, and applications related to the assessment of dose distribution using OSLDs in the form of film or ceramic plate (BeO). Additionally, it reviews research published in the international scientific literature from 1998 to 2021. As an outcome, a table containing the main characteristics of each relevant paper is shown. The results section was divided by the type of OSL material, and we briefly described the principal findings and the significant developments of each mentioned study such as film production and OSL reader assembly. The purpose of this study was to present an overview of the main findings of several research groups on the use of OSLD in the form of film or plate for 1D and 2D dose mapping. Finally, the potential future development of dose mapping using OSLD films was outlined.
3 March 2023 in Brazilian Journal of Radiation Sciences
Since its discovery, ionizing radiation has been used in many different applications. Materials and methods have been developed to measure and quantify radiation doses. Thermoluminescence (TL) and Optically Stimulated Luminescence (OSL) are two techniques used for radiation dosimetry. Both TL and OSL are primarily applied in several areas, such as dating of ancient materials, equipment quality control and individual monitoring. One of the parameters to measure the knowledge and development of a technology is the number of patents related to the field. In this work, we established a methodology for patent search on the World Intellectual Property Organization (WIPO) database aiming to review the development of TL and OSL dosimetry over time. We concluded that along with the OSL technique development, the TL technique should continue to be explored in radiation dosimetry.
29 March 2023 in Brazilian Journal of Radiation Sciences
Laser radiation can cause undesirable biological effects on living beings; although it is not ionizing, this type of radiation can cause burns to the skin and cornea, even cataracts, depending on the wavelength and intensity of the laser radiation. Due to the wide growth of laser applications in several areas, such as research and development, services, and industry, the occupational risks concerning this non-ionizing radiation have increased considerably worldwide. Several countries have normative documents and regulatory bodies or agencies that approach occupational safety and quality regarding laser application, equipment, and machines. In Brazil, there is a lacking of laser safety documents published by a national regulatory council. Therefore, large technological centers and educational institutions, such as SENAI Institute for Innovation in Laser Manufacturing and Processing Systems (ISI-Joinville) and the Federal Technological University of Paraná (UTFPR), do not have an institutional safety program for laser operations, and to adapt to the most modern international recommendations they look for international documents and models from other institutions. The main objective of this work was to develop and propose an institutional program following Brazilian regulatory documents from the Ministry of Labor and Social Security and the most modern international standard about laser safety from the American National Standards Institute (ANSI-Z 136-1: 2014). The developed safety program was applied to ISI-Joinville, but a model was adapted to be implemented at any research center and university.
O artigo apresenta uma comparação quantitativa entre dosímetros termoluminescentes (TLD - Thermoluminescent dosimeters) e diodos semicondutores aplicada para dosimetria in vivo de tratamentos de total body irradiation (TBI). Foram realizadas medidas a fim de expressar a capacidade dos detectores em estimar a dose absorvida no centro de um fantoma de água sólida, utilizando dois métodos de cálculo diferentes. O primeiro método utiliza a média dos valores de dose na superfície de entrada e saída do fantoma para estimar a dose no seu centro. Já no segundo método, a estimativa é realizada através do valor de dose na superfície de entrada do fantoma aplicado a uma equação que considera o tissue phantom ratio (TPR) e a lei do inverso do quadrado da distância. Para os diodos semicondutores foram encontrados desvios médios de 5,1% para o primeiro método de cálculo e 1,6% para o segundo método, já para os TLD foram encontrados desvios médios de 1,6% para o primeiro método de cálculo e 2% para o segundo método.