3 April 2021 in Arabian Journal for Science and Engineering
9 April 2022 in KSCE Journal of Civil Engineering
Transverse post-tensioning arrangement in prefabricated prestressed concrete (PC) box-girder bridge can effectively improve the transverse connection’s performance to avoid stress concentration. The number of transverse post-tensioning tendons and the transverse post-tensioning force are crucial factors determining the live load’s lateral distribution. Four prefabricated PC box-girder model tests were carried out to calculate the lateral distribution of the live load. Based on experimental results, the recommended values of the reduction factors of contact interfaces considering the effective longitudinal transfer length of transverse post-tensioning were given, and a simplified method of lateral distribution factor was proposed. The proposed simplified method results were compared with the PCI code, experiments, finite element method, articulated plate method, and rigid-plate method. The results showed that the lateral distribution factor calculated by the simplified method agreed with the results of experiments and the finite element method. The average relative differences were less than 8%. In comparison, the relative differences were more than 15% for the PCI code, articulated plate method, and rigid plate method. Thus, the proposed method could meet the engineering application and be adopted to calculate the lateral distribution factor of bridges with transverse post-tensioning.
10 May 2017 in International Journal of Damage Mechanics
Above-deck car-bomb attacks cause significant effects on engineering structures from those of explosive blasts in the free air. In this paper, a post-disaster investigation for an existing bridge under above-deck car-bomb blast loading is presented. The crack distribution and damage deformation of the blast loaded girders are systematically investigated, and the blast effect zone is proposed to describe the blast loading distributions on girders and to characterize the girder structural behavior. The girder failure is dominated by one of the three typical damage mechanisms: shear, flexural-shear, and flexural, depending on the blast effect zone where the girder is located. The study also indicates that the isolation effect of the vehicle can significantly affect the blast loading distribution on structures, even though the isolation effect is localized in a region with a small standoff distance. It is gradually attenuated by the increase of the standoff distance. Numerical analysis is conducted to verify the findings by simulating the truck isolation effect with a steel plate.
27 June 2019 in International Journal of Damage Mechanics
With the rapid development of high-speed railway construction around the world, the structural damage problem of tracks and bridges has attracted more and more attention. In this paper, considering the random structural damages of tracks and bridges, an efficient computational procedure is developed based on the probability density evolution method to systematically investigate the random characteristics of the dynamic responses varying with the damages in vehicle–track–bridge time-dependent systems. Firstly, a vehicle–track–bridge dynamic model with random structural damage parameters is established, and the random motion equations are derived based on the generalized energy principle. Then, the probability density evolution equation for each random response is established and the random feature is investigated by the proposed computational procedure. Finally, the representative numerical examples are applied and some conclusions for the effects of the random structural damages on the dynamic responses of the vehicle–track–bridge systems are presented.
1 November 2023 in Structural Concrete