18 October 2021 in IEEE Journal of Emerging and Selected Topics in Power Electronics
This article proposes an interleaved, highly efficient, high-gain modified boost converter. High-gain and transformerless converter operation makes the converter suitable for integrating photovoltaic (PV) power to standalone dc microgrid. A coupled inductor is used with two diodes and one switch per phase with a common clamping capacitor to modify the conventional boost converter. The common clamping capacitor and the coupled inductor reduce the converter’s component count and size; thus, high efficiency is achieved at a low cost. The proposed converter achieves a high step-up gain and low voltage stress on switches. Interleaved converters are deemed ideal for PV power extraction as they exhibit low input current ripple. A 900-W prototype of a two-phase interleaved modified boost converter is designed and developed to verify the working principle of the converter and performance testing.
19 January 2021 in IEEE Access
Double-stator switched reluctance motors (DSSRMs) with single-tooth winding topology possesses high torque density when compared to conventional switched reluctance motors (SRMs). However, their inherent high torque ripple is still an issue for industrial applications. In SRMs, the torque shared by the outgoing phase reduces significantly in the commutation region. However, at the same time, the incoming phase does not achieve sufficient torque generation. This results in a high torque ripple in this region. In this paper, several design procedures are discussed to improve the performance of the radial flux DSSRM with single-tooth winding topology. Firstly, the pole arc equations of stator pole and rotor segments for the higher difference between aligned and unaligned inductance are derived for high output torque and based on this, the selection of the number of stator slots/rotor segments is discussed. Furthermore, the influence of winding polarities on the core loss and output torque of DSSRM is discussed. Finally, the design modification in rotor structure is proposed with an angular shift in the alternate rotor segments in the direction of rotation to mitigate the torque ripple. To investigate the effectiveness of the proposed design modification, a finite-element model of a 3-phase 12/10/12 pole radial flux DSSRM is developed in ANSYS/MAXWELL software, and simulation results are presented. It is observed that a 40% reduction in the torque ripple is achieved in the case of the proposed motor. The proposed design modification improves the torque generating capability of the incoming phase in the commutation region, which reduces the torque dip in this region and subsequently reduces the torque ripple.
19 June 2018 in European Journal of Futures Research
Many factors are influencing the acceptability of energy technology. The transformation of the energy sector is looking for clean energy technology that is also suitable for baseload power generation. Terrestrial solar energy has many obstructions, so solar power from space without any hindrance has higher priority for adoption, and it is suitable for future energy continuous demand supply. As technology is advancing, the possibility of satellite solar-based power station is more than a science fiction now and is possible in the coming future. Microwave transmission with high beam efficiency is the key issue to be improved for the feasibility of satellite solar power station. Besides others, research should focus on the reduction of space segment’s components dimension and space vehicle dispatch cost. Concerning space segments, applying an optimized value of fractional power unit modules and assembling it for constant baseload power supply have economic advantages, as well as that the antenna size is also reduced. This work deals with system components size estimation and optimization for a selected 10-GW baseload power supply. Four case studies have been conducted considering the different unit sizes, and the system model is analyzed for suitable power unit selection.
13 February 2024 in IEEE Journal of Emerging and Selected Topics in Industrial Electronics
The imperative lies in adapting a high-voltage converter for renewable energy integration. The study puts forward a nonisolated high voltage gain dc–dc converter which is an amalgamation of boost and luo converters. Given its notable attributes, such as high voltage gain, employment of a single switch, and utilization of common ground topology, this configuration proves suitable for low voltage renewable applications. The operational behavior of the converter is evaluated for both continuous and discontinuous conduction modes of operation, and its design parameters are presented. Efficiency, design equations, volume of storing elements ( L , C ), voltage and current stress of used devices are computed and compared. Small-signal modeling is included in this article for dynamic analysis of the converter. In addition, a Proportional Integral (PI) controller is implemented for closed-loop voltage regulation. A 312 W converter prototype is designed, developed, and analyzed to verify its working principle, and the obtained converter efficiency is 94.89 $\%$ .
28 June 2018 in IETE Journal of Research
This work presents an enhanced rectenna with differentially fed antenna array for RF energy harvesting. First, a linear antenna array is designed considering its side lobes less than −20 dB. Two antenna array, one with a single feed and other with differential feed, is designed to operate at 5.8 GHz. The measured peak gain of single fed and differentially fed is 13.38 and 14.29 dBi, respectively, at 5.8 GHz. The two antenna array, one with a single feed and other with differential feed, is tested for RF energy harvesting. It is observed that the differentially fed rectenna has higher output DC power than the single fed rectenna. The differentially fed rectenna has higher efficiency as compared with single fed rectenna for the power density variation from 5 to 238 µW/cm2, it has maximum efficiency (RF-DC) of 82.4% at 232 µW/cm2.