28 March 2024 in IEEE Transactions on Vehicular Technology
The reconfigurable intelligent surface (RIS) is considered a promising technique to improve the performance of user equipments in service dead zones in cell-free massive multipleinput multiple-output (CFmMIMO) systems. In this paper, we investigate the impact of channel aging on the uplink CFm- MIMO system aided by RISs with spatially correlated elements. We derive the closed-form expression of the uplink achievable spectral efficiency (SE) with the matched-filter receiver under channel spatial correlation and channel aging. Assuming only the statistical channel state information, we propose a two-step optimization scheme including the RIS phase shift design and power allocation. We first formulate the maximum normalized mean-squared error minimization problem to design the RIS phase shift in uplink training and solve it using the successive convex approximation algorithm. Then, we solve the sum SE maximization problem in the uplink data transmission to accomplish the power allocation by using the Lagrangian dual reformulation and the fractional programming theory. Extensive numerical results demonstrate the effectiveness and convergence of the proposed two-step optimization scheme.
23 December 2024 in IEEE Internet of Things Journal
Thanks to the customization of channel propagation, reconfigurable intelligent surface (RIS)-aided cell-free (CF) massive multiple-input-multiple-output (MIMO) is recognized as a competitive candidate technique for the future communication system. However, only the limited performance gain can be afforded by passive RIS due to the double-fading effect in RIS-aided links. In this article, we consider the CF massive MIMO system with the assistance of the active RIS, which is capable of reflecting and amplifying the incident signal, to enable the Internet of Things network. We analyze the tradeoff between the number of active RIS reflecting elements (REs) and the amplification coefficient. Considering the power constraint at the active RIS, we formulate a sum-rate maximization problem to jointly optimize the user transmission power, the receive beamforming, and the RIS reflecting precoding. Since the original problem is nonconvex, we decouple it into three subproblems and then design an alternating optimization algorithm to solve them iteratively. Using the Lagrangian dual reformulation and generalized Rayleigh quotient theory, we derive the closed-form solutions for both the user transmission power and the uplink receive beamforming. We also develop a low-complexity method to acquire the RIS reflecting precoding based on the primal-dual subgradient theory. Compared to the passive RIS, the active RIS can significantly improve the system performance with fewer REs. Moreover, the proposed optimization scheme effectively mitigates the drawbacks of the active RIS under the high-transmission power regime and enhance its benefits. Finally, the proposed alternating optimization algorithm is validated by numerical results.
22 April 2024 in IEEE Internet of Things Journal
In this paper, we consider the cell-free massive multiple-input multiple-output (MIMO) system for supporting ultra-reliable and low-latency communication (URLLC) transmission, where a large number of access points (APs) serve a small number of users in the short packet regime. Assuming channel aging and channel spatial correlation, we derive the closed-form expression of the downlink achievable rate with the normalized conjugate beamforming (NCB). Under the goal of maximizing the minimum user rate, we formulate a max-min power optimization problem with a power constraint at each AP. However, it is challenging to solve this problem because the objective function is a complicated function of power coefficients. To tackle this difficulty, we use a path-following method to approximate the objective function to a logarithmic function and transform the polynomial constraint into a monomial. Thus, we can iteratively solve the original problem by reformulating it as a series of geometric programming problems. Numerical results verify the tightness of the closed-form expression for the downlink achievable rate in the short packet regime. Both channel aging and channel spatial correlation significantly degrade the system performance of CF massive MIMO URLLC systems. Moreover, Using NCB and the proposed max-min power allocation can effectively alleviate this impairment and improve the system performance.
30 January 2024 in IEEE Wireless Communications Letters
Intelligent reflecting surface (IRS) assisted cell-free (CF) massive multiple-input multiple-output (mMIMO) offers substantial potential for enhancing spectral efficiency, energy efficiency, and coverage areas. In this letter, we introduce a novel approach aimed at maximizing the sum-rate in the downlink of IRS-assisted CF mMIMO systems. Our approach employs an alternating optimization strategy to design both active and passive beamforming techniques. Specifically, for active beamforming, we adopt zero-forcing beamforming to effectively eliminate inter-user interference, and we employ geometric programming to obtain optimal power allocation coefficients. For passive beamforming, we present innovative solutions through the alternating direction method of multipliers (ADMM) algorithm and the Broyden-Fletcher-Goldfarb-Shanno (BFGS) algorithm. Additionally, we rigorously analyze the computational complexity of our proposed algorithms, providing a comparative assessment against existing approaches. Our simulations substantiate the superior sum-rate performance achieved by our algorithms, underscoring their efficacy in IRS-assisted CF mMIMO systems.
5 August 2024 in IEEE Internet of Things Journal
In the context of Internet-of-Things, this paper considers a cell-free (CF) massive multiple-input multiple-output (MIMO) system for ultra-reliability and low latency communication (URLLC) assisted by multiple reconfigurable intelligent surfaces (RIS). We derive the closed-form expression of the downlink achievable rate under multiple correlated RISs and pilot contamination. To mitigate the impact of pilot contamination and improve the fairness among users, we minimize the maximum normalized mean-squared error (NMSE) of the channel estimation by jointly optimizing the pilot power coefficient and the RIS phase shifts. Due to the non-convexity of the original problem, we design an alternating optimization algorithm to solve the substitutable two sub-problems using fractional programming and sequential convex approximation. Numerical results validate the proposed algorithm in terms of decreasing the maximum user NMSE and converging. Moreover, the 95%-likely per-user downlink achievable rate is also improved.
7 August 2024 in IEEE Wireless Communications Letters
This letter investigates the downlink simultaneous wireless information and power transfer in a reconfigurable intelligent surface (RIS)-aided Internet-of-Everything network relying on cell-free architecture. In our network, the access points beam the energy and information signals toward users by means of time-switching protocol. Based on the correlated Rician fading channels, we derive tight closed-form expressions for the downlink achievable harvested energy and rate under imperfect channel state information. Moreover, we propose a particle swarm optimization-based algorithm in terms of RIS phase shift to maximize the achievable harvested energy and rate. All theoretical analyses and the effectiveness of the proposed algorithm are verified via extensive simulations.