13 October 2023 in IEEE/ASME Transactions on Mechatronics
To address the current problem of decoupling between joints and the fixed synergy relationship of underactuated fingers, an adaptive and dexterous underactuated finger named the LMH finger was designed in this article. The LMH finger has two degrees of actuation (DoAs) and three degrees of freedom (DoFs) based on the predefined elastic force (PEF) gradient, which actively changes the joint coupling relationship and the synergistic control structure. With the changes in the driving forces and external forces, the LMH finger is used to establish three conditional synergistic control (CSC) laws for the mutual transformation of adaptivity and dexterity. With a double-tendon-pulleyed winding mechanism and a PEF gradient, the LMH finger provides three single-joint independent motion modes and four multijoint synergistic motion modes in a simple differential control of double driving forces. To improve the antagonistic control ability of bending and extension and the enveloping ability, the crank–slider and crank–rocker mechanisms of the LMH finger provide a force synergy mechanism and a continuous contact surface for replaceable modules. Depending on the control conditions of driving forces, external forces, and PEFs, the LMH finger can approximately achieve the dexterity of human fingers in the pregrasping stage and adaptivity in the grasping stage. Finally, the CSC method and the design paradigm are successfully applied to a two-DoA and six-DoF underactuated two-fingered hand for symmetric and asymmetric dexterous manipulations, which verifies the improvement in the grasping adaptability and manipulative dexterity.
14 October 2024 in Applied Physics Letters
Digital microfluidic chips (DMCs) have shown the ability to flexibly manipulate droplets and particles, which is meaningful for biomedical applications in drug screening and clinical diagnostics. As a critical component of DMCs, the dielectric layer, with its key physical parameters (permittivity and thickness), directly determines the voltage distribution, thereby significantly affecting the manipulation performance. To optimize manipulation performance, simulation studies on dielectric layer parameters are essential during the DMC design. Existing simulation methods can evaluate the effect of dielectric layer parameters on droplet manipulation but encounter inherent challenges when analyzing the manipulation of particles within droplets. Here, we propose a versatile numerical analysis approach that can simultaneously analyze the effect of dielectric layer parameters on both droplet and particle manipulation, thereby optimizing the dielectric layer parameters to enhance the DMC manipulation performance. Initially, the voltage distributions corresponding to different sets of dielectric layer parameters are solved using electromagnetic field theory. Subsequently, the voltage distribution data are used to calculate the droplet and particle driving forces based on the principle of virtual work. Finally, by comparing the driving forces across different sets of dielectric layer parameters, the optimal dielectric layer parameters are determined to enhance the DMC manipulation performance. Experimental results demonstrate that the droplet and particle accelerations align with the simulated driving force trends, thereby validating our numerical analysis method. We anticipate that our method will be able to provide theoretical guidance for the optimization of dielectric layer parameters to obtain a desirable manipulation performance in more complex DMC designs.