1 March 2024 in Review of Scientific Instruments
An iterative algorithm for the diffusion of heat in layered structures is solved in cylindrical coordinates for the geometry used in measurements of thermophysical properties of materials by the modified transient plane source (MTPS) method. This solution for the frequency-domain temperature response is then used to model the transient temperature excursion and evaluate the accuracy of the measurements. We evaluate when the MTPS method is capable of separately determining the thermal conductivity and heat capacity per unit volume of a material. For a typical sensor design, data acquisition, and data analysis, the MTPS measurement has a small sensitivity to the thermal diffusivity of the sample when the thermal diffusivity is <5 mm2 s−1. We analyze the propagation of errors from uncertainties in the thermal contact between the sensor and the sample and evaluate the limitations of the MTPS method in accurately measuring samples with extremely low thermal effusivity, e.g., low density foam insulation. We find that uncertainties in the thickness of the contact region limit the accuracy of MTPS measurements when the data are analyzed in a conventional manner based on a single parameter, m−1, the inverse of the slope of the temperature excursion as a function of the square root of time.
11 July 2025 in ECS Meeting Abstracts
Accurate thermal modeling is an invaluable tool for designing effective battery systems at cell, pack, and module levels. The need for effective modeling is only exacerbated as we push towards faster charging procedures and extreme temperature conditions for batteries. Creating a successful thermal model is dependent on experimentally derived thermal properties of the various components used to create the battery. Thermal conductivity of these components is of particular importance as it denotes a material’s ability to move heat away from high temperature regions. The liquid electrolyte in lithium-ion batteries has the lowest thermal conductivity of all battery components. There is surprisingly limited data on the thermal conductivity of solutions used to make electrolytes or on the impact of different mixtures or salt concentrations on the thermal conductivity. Our work utilizes a novel measurement tool, thermo-optic phase spectroscopy (TOPS), to determine the thermal conductivity of common battery electrolyte solvents and several binary mixtures. Our work also explores the change in thermal conductivity of these electrolytes at room and elevated temperatures. Included in this study are solvent and electrolyte solutions of dimethyl carbonate, ethylene carbonate, dimethoxyethane, and 1,3-dioxolane with LiPF6 and LiTFSI salts at temperatures from 25oC to 55oC. Results from these experiments have shown thermal conductivities of the different solutions ranging from below 0.14 W/m-K to above 0.21 W/m-K. The results of this work provide vital information for battery design and thermal modeling. By revealing the impact of solvent and lithium salt concentration on the thermal conductivity of liquid electrolytes, models can more accurately predict the thermal response of battery systems and provide insight on how to design more robust and thermally stable batteries.
9 November 2026 in Cell Reports Physical Science